Ingersoll-Rand 5213-1B, 7015-11 manual Wear eye protection, Operating or performing, NON-EU Models

Page 2

FAILURETOOBSERVETHEFOLLOWINGWARNINGSCOULDRESULTIN INJURY.

WARNING

 

Wear eye protection

when

..

operating or performing

maintenance on this

tool.

I

WARNING

Wear hearing protection when operating this tool.

WARNINGWARNING

Turn off air supply and disconnect air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool.

WARNING,

Do not carry the tool by the hose.

Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions may be harmful to your hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use.

WARNING

Do not use damaged, frayed or deteriorated air hoses and fittings.

WARNING

Do not overreach when operating this tool. Keep body stance balanced and firm.

WARNING

Operate at 90 p.s.i.g. (6.2 bar/620 kPa) maximum air pressure.

NOTICE

PN 48176-1 LABEL

PN 49993 LABEL

(NON-EU MODELS)

(-EU MODELS)

This label must appear on the tool at all times. It It Is lost or damaged, a replacement label is available at no cost.

WARNING = Hazards or unsafe practices which could result in severe personal injury, death or substantial property damage.

CAUTION = Hazards or unsafe practices which could result in minor personal injury or product or property damage.

NOTICE = Important installation, operation or maintenance Information.

2

Image 2 Contents
Released Short GrinderM10 2884-2NON-EU Models Wear eye protectionOperating or performing Recommended Lubricants Routine Lubrication RequirementsAIR Supply Requirements Mounting InstructionsItems Included in Service KIT no 29j-27Part Number for Ordering Service13M10 Motor Disassembly DISASSEMBLY/ASSEMBLY InstructionsThrottle Assembly Motor AssemblyPart of Worldwide Ingersoll-Rand