RIDGID R81030 manual Assembly

Page 9

FEATURES

KNOW YOUR SCREWDRIVER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your screwdriver has a direction of rotation (forward/reverse/ center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

STICK/PISTOL COMBINATION

The screwdriver has been designed so that it can be oper- ated as a stick screwdriver or a pistol screwdriver.

TORQUE ADJUSTMENT RING

Your screwdriver has a 16-position clutch. The torque adjust- ment ring can be turned to select the right amount of torque for your application.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the tool and any accessories from the box.

nMake sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

9.6Volt Screwdriver Bag

Battery Pack (2) Charger Screwdriver Bit Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.

9

Image 9
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetySpecific Safety Rules Battery Tool USE and CareService Safety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Features Product SpecificationsSwitch Trigger Assembly Operation LED Function of Charger Power Indicator Evaluate Indicator Charging FullTo Install Battery Pack To Remove Battery PackLatches Adjusting Torque Adjustable Torque ClutchAdjusting To Decrease Ring Torque To Increase Reverse ForwardInstalling Bits STICK/PISTOL PositionCoupler Removing Bits Using the ScrewdriverLocking Groove BIT CouplerGeneral Maintenance MaintenanceBattery Pack Removal Preparation for Recycling BatteriesDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information