MURO VL71-FLR manual Removal of Visrope, Bit replacement

Page 7

5. Removal of VISROPE

To remove the VISROPE, pull out the VISROPE while the guide cover and the grip finger are open. * Push the main body 5mm or so to facilitate withdrawal of the VISROPE.

6. Bit replacement

To remove the bit, first pick up the bit as much as possible while pulling the sleeve. Then, while pulling back (pressing down) the top end, pull out the whole bit.

To mount the bit, insert the bit while pulling back (pressing down) the top end. Then, while pulling the sleeve, insert the bit fully to its position and fix it by returning the sleeve. After this, make sure that the bit is fixed completely at its position by moving it up and down.

*The bit is consumable. Worn-out bit may cause poor tightening or damage the screw head. Replace the bit with a new one before it is worn out.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Heavy Duty Auto Feeding Screwdriving Tool Parts designation Specifications Safety precautionsAssembling Vislider Assembly and fitting of rod handleFitting and removal of magazine Loading Visrope Setting VisropeSwitching magazine inner lid Visrope types and stopper block adjustmentFeeding screws Screw guide position adjustmentDriving screws Adjustment of guide coverDriving screws Direction of bit rotationRemoval of Visrope Bit replacementVL71-FLRWarranty Card Maintenance and inspection
Top Page Image Contents