Speciﬁcations | Mitsubishi Electronics XL7000U specs

Speciﬁcations

The speciﬁcations and outside appearance of the projector are subject to change without prior notice.

Type		LCD projector

Model		XL7000U

Display technology		0.8-inch LCD panel: 3 pieces (for R,G,B)
		Pixel: 1024 x 768 = 786432 pixels Total 2359296 pixels
		"DUJWFQJYFMSBUF	PSNPSF FBDIQBOFM
Projection lens		F 1.8 - 2.6 f= 24.0 - 43.2 mm

Light-source lamp		321 W

Image size (projection distance)		40” min. to 300” max. (projection distance 1.2 to 9.1 m)

Maximum resolution	Computer signal	Maximum resolution: 1920 x 1200 dots (compressed)
		Panel resolution: 1024 x 768 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60

	Component signal	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
		Panel resolution: 1024 x 768 dots
Computer/component video input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
		Analog RGB	5 BNC	1
		Digital RGB	DVI-D 24-pin	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	BNC	1
		S-video input	S	1
Audio input		[Signal type]	[Terminal type]	[Line]
		3(#$PNQPOFOU	4UFSFPNJOJKBDL
		%JHJUBM3(#	4UFSFPNJOJKBDL
		Video	RCA (L, R)	1
		S-video	RCA (L, R)	1
HDMI input		[Signal type]	[Terminal type]	[Line]
		HDMI	HDMI 19-pin	1
Monitor output		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
Audio output		[Signal type]	[Terminal type]	[Line]
		3(#$PNQPOFOU	4UFSFPNJOJKBDL
Speaker		10 W Mono Round type x 1

Control terminal/others		34$ %46#QJO -"/ 3+ 3&.05&*/065 4UFSFPNJOJKBDL
Operating temperatures		+41°F (+5°C) to +104°F (+40°C): (Standard altitude mode: All projection angles)
		+41°F (+5°C) to +86°F (+30°C): (High altitude mode: Floor installation/ceiling
			installation)
Rated voltage		AC 100 - 240 V, 50/60 Hz
Power consumption		5.7 A, 480 W
		During standby:
		AC 100 - 120 V: 5 W (when STANDBY MODE is STANDARD)
		1.8 W (when STANDBY MODE is LAN)
		0.2 W (when STANDBY MODE is LOW)
		AC 220 - 240 V: 5 W (when STANDBY MODE is STANDARD)
		1.8 W (when STANDBY MODE is LAN)
		0.3 W (when STANDBY MODE is LOW)
Dimensions (not including protrusion)		481 mm (W) x 179 mm (H) x 418 mm (D) (projector only)
		481 mm (W) x 179 mm (H) x 502 mm (D) (including the terminal cover)
Weight		10.5 kg (projector only), 11.0 kg (including the terminal cover)
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)

	Component video	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
	Digital input (HDMI)	HDMI interface (TMDS single link) (Only PCM audio is supported.)
	Audio input	350 mVrms, 10 kΩ or more

Replacement part (option/not included in the box)

Spare lamp: VLT-XL7100LP

Option lenses: OL-XL7100SZ, OL-XL7100LZ, OL-XL7100TZ, OL-XL7100FR

EN-63

Image 63

Mitsubishi Electronics XL7000U user manual Speciﬁcations, Replacement part option/not included in the box

Contents

XL7000 Risk of Electric Shock Do not Open Contents Important safeguards Do not keep using the damaged projector Important safeguards Preparing your projector Checking accessoriesInserting the batteries into the remote control Removing the batteries from the remote control Preparing your projector OverviewControl area Indicators Remote controlBottom side Reception angle Using the remote controlOperational range of the remote control Using the wired remote control Setting by using the projector Using the remote controlSetting the ID number of the remote control Setting by the remote control alone Screen size and projection distance Setting up your projectorBefore setting up Setting up the screen Changing the Auto Power OFF setting Setting up your projectorSetup adjustment Adjusting the position of the projected image When the projected image is distorted Setting High Altitude ModeSetting Image Reverse When ﬁne streaks are seen on projected images Keystone menu Adjustment using the Keystone modeAdjustment using the Cornerstone mode Keystone → Reset → Keystone HORIZ. Origin or VERT. Origin menu Adjustment using the Curved modeLower RIGHT, Lower LEFT, Upper RIGHT, or Upper Left menu ARC menu Be corrected by the CORNERSTONE-mode adjustment Adjusting the origin to the vertical arc /FBSBIFBUFS Front projection, ceiling mountingRear projection *OBEVTUZPSIVNJEQMBDF Viewing computer images Connecting the projector to a computer For monitor connection Plugging the power cordViewing computer images About DDC Installing the terminal cover Select an input source Conﬁrm the Power indicator lights up redProjecting images 3FNPWFUIFMFOTDBQ Direct Power OFF To stop projecting $PWFSUIFMFOTXJUIUIFMFOTDBQUPQSPUFDUJUGSPNEVTU Blanking the screen temporarily Blank When connecting to a notebook computerSetting of the resolution Example of the setting procedure for external output Viewing video images Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connected Projector + DVD player or Hdtv decoder Viewing video images Connection for video equipment having a DVI-D terminal Plugging in the power cord EN-27 Setting the aspect ratio Volume from the speaker With the Feature menu See page 31 for menu setting How to change the settings With the remote control Image menu Installation menu Feature menu Signal menu Network menu Information menuMenu operation Press the  or  button to select a menu to use How to set the menusPress the  or  button to select an item to adjust Menu operation See Image menuAuto Enhanced Auto Power OFF Setting Function Lamp Mode StandardStandby Mode Standard Auto Power on On / OFF Aspect Normal Menu Access Splash ID Screen Menu PositionCinema Mode Auto High Altitude Mode Standard Reset ALL Setting Function Advanced Menu EnterVideo Signal Auto / Ntsc / PAL / Secam Setup Auto Signal menu Default Gateway Setting Function Projector NameNetwork Password Enter IP Config Enter Serial Number ResolutionDescription Lamp Time LOW To adjust the tone of white Color Temp Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and Tint Adjusting projected images About color temperatureColor Enhancer Select NCM by pressing the  or  button Adjusting the ﬁneness of the image Super ResolutionAdjusting the tone of each color NCM Select an item you want to set using  or  button YES How to adjust the computer image LPF Progressive ﬁlter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical position Enabling or disabling the network certiﬁcation Initial network settingsSetting Projector Name Network Password Settings IP Address Settings Initial network settingsIP Settings Setting or Clearing Dhcp Saving IP Config Settings Setting the control systemSubnet Mask Settings Default Gateway Settings Dhcp Initialization of Network SettingsHow to Use Network Function Glossary Advanced features Setting procedureChanging the image displayed at the startup To cancel the password function Advanced featuresPassword function To enable the password function Picture in Picture PinP Magnifying the displayed imageFreeze Major functions Connection PJLink supported commands Replacing the lamp Interval of lamp replacement Reset of the lamp operation time Replacing the lampTo replace the lamp When removing the lamp from the ceiling-mounted projector Cleaning of the ﬁlter MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lens Replacing the lens Removing the lensMounting the lens option lens No image appears on the screen Problem Solution Troubleshooting Troubleshooting Problem SolutionImages are not displayed correctly Images are not displayed correctly Problem Solution Others Problem Solution$IFDLUIBUUIFWPMVNFJTOUTFUUPMPX FOCUS/ZOOM JUUIFMBNQDPWFSTFDVSFMZ 4FFQBHF3FTFUUIFMBNQPQFSBUJOHUJNF 4FFQBHF Indicators Power Status Filter ConditionPower Status Filter Condition Possible Solution Speciﬁcations Replacement part option/not included in the box XGA85 Speciﬁcations Hdmi Serial ConnectorsDimension drawings unit mm Composite Sync With tele throw zoom lens OL-XL7100TZ Speciﬁcation of the attached lensWith short throw zoom lens OL-XL7100SZ With long throw zoom lens OL-XL7100LZ Projection With rear projection short throw OL-XL7100FR Mitsubishi Electric Corporation