Using the remote control (continued)
Setting the ID number of the remote control
You can control multiple projectors collectively or individually using one remote control by setting the ID number (CONTROLLER ID) of the remote control.
To control multiple projectors using the remote control, you need to select the projector’s ID number (PROJECTOR ID) with the remote control in advance. ID numbers should be
ID button 
Number (0 to 9) 
buttons
ALL button
Setting by the remote control alone
1.While holding down the ID button on the remote control, press the number buttons (0 to 9) to set a
Or, while holding down the ID button on the remote control, press the ALL button.
t :PVDBOOPUTFUUIF*%OVNCFSCZQSFTTJOHUIF number buttons (0 to 9) or the ALL button unless pressing them while holding down the ID button on the remote control.
Setting by using the projector
1.Carry out the procedure described in “Setting by the remote control alone” with the remote control directed to the projector.
t 5IF*%TFUUJOHEJBMPHCPYJTEJTQMBZFEPOUIF upper right area of the screen.
PROJECTOR ID | XX |
|
|
CONTROLLER ID | YY → ZZ |
(01 - 63/ALL) |
|
|
|
“COMPLETE” is displayed under the CONTROLLER ID number you entered.
t 5IF*%TFUUJOHEJBMPHCPYBVUPNBUJDBMMZ disappears after it is displayed for about 5 seconds.
t #ZQSFTTJOHBOZCVUUPOPUIFSUIBOUIF*%CVUUPO number buttons (0 to 9), and ALL button while the ID setting dialog box is being displayed, you can cancel the dialog box.
When the CONTROLLER ID setting has failed:
PROJECTOR ID | XX |
|
|
CONTROLLER ID | YY → ZZ |
(01 - 63/ALL) | ERROR |
|
|
“ERROR” is displayed under the CONTROLLER ID number you entered.
t 5IF*%TFUUJOHEJBMPHCPYBVUPNBUJDBMMZ disappears after it is displayed for about 5 seconds.
t #ZQSFTTJOHBOZCVUUPOPUIFSUIBOUIF*%CVUUPO number buttons (0 to 9), and ALL button while the ID setting dialog box is being displayed, you can cancel the dialog box.
Setting PROJECTOR IDs
You can monitor and control multiple projectors individually.
PROJECTOR IDs should be
t
t #ZBTTJHOJOHUIFTBNF130+&$503*%UPNVMUJQMF projectors, you can monitor and control those projectors collectively.
(See page 31 for menu setting.)
1.Display the FEATURE menu.
2.Select PROJECTOR ID by pressing the or button.
|
| PROJECTOR ID | ALL |
|
|
|
|
3.Set the PROJECTOR ID by pressing the or button.
Important:
tTo monitor and control the projectors individually, assign different PROJECTOR IDs to them.
tBy assigning ALL, you can monitor and control the projectors regardless of the ID numbers.
XX:Shows the ID number of the projector. (When the PROJECTOR ID is “ALL,” “ALL” is displayed.)
YY:Shows the current CONTROLLER ID. (When the CONTROLLER ID is “ALL,” “ALL” is displayed.)
ZZ:Shows the CONTROLLER ID to be changed. (When the CONTROLLER ID is “ALL,” “ALL”
is displayed.)
t Before a CONTROLLER ID is entered, ** is displayed. When you press a number button (0 to 9), the left digit of the ID number is entered first.
When the CONTROLLER ID setting has succeeded:
PROJECTOR ID | XX |
|
|
CONTROLLER ID | YY → ZZ |
(01 - 63/ALL) | COMPLETE |
|
|
Important:
t *%OVNCFSTTIPVMECFUXPEJHJUOVNCFSTiwUP “63.” The other numbers are invalid.
t 8IFOUIF130+&$503*%OVNCFSJTBOZPG “01” to “63,” you can control the projector by matching the CONTROLLER ID with the PROJECTOR ID number or setting it to “ALL.”
t When the PROJECTOR ID number is “ALL,” you can control the projector using the remote control regardless of the CONTROLLER ID number.
t 8IFOUIF130+&$503*%OVNCFSJTVODFSUBJO you can control the projector regardless of the ID number by setting the CONTROLLER ID to “ALL.”
