Mitsubishi Electronics XL7000U user manual Connectors, Dimension drawings unit mm, Composite Sync

Specifications (continued)

Specification of RGB signals in each computer mode of the projector (continued)

Important:

t
Some computers aren’t compatible with the projector.

t
The projector’s maximum resolution is 1024 x 768 pixels. It may not display images of higher resolutions than 1024 x 768 correctly.

t
Images with SYNC on G (Green) signal may jitter. t
Images with SYNC on G (Green) signal may be

tinged with green.

t
If the resolution and frequency of your computer aren’t shown on the table, find the compatible resolution and frequency by changing the resolution of your computer.

t
57
BOE
57
BSF
FRVJWBMFOU
UP
J
BOE
J
respectively. When these signals are supplied to the VIDEO IN or S-VIDEO IN terminal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPUTER/COMPONENT VIDEO IN terminals, the signal mode is indicated as 480i or 576i.

t
5IJT
QSPKFDUPS
EPFTOU
TVQQPSU
Q
TJHOBMT
GSPN
video devices having 4 lines (R, G, B, CS*) or having 5 lines (R, G, B, H, V).

* : Composite Sync

Connectors										COMPUTER/COMPONENT/VIDEO								COMPUTER/COMPONENT/VIDEO									HDMI IN
SERIAL										IN 1 (Mini D-SUB 15-pin)								DVI-D IN (HDCP) (DVI-D 24-pin)									(HDMI 19-pin)
(D-SUB 9-pin)												5		1					24		17								1	19
9		5			1				6			10					6		16						9
												15		11
																				8	1								2	18
	Pin No.	Name				I/O				Pin No.			Spec.	Pin No.		Spec.		Pin No.	Spec.	Pin No.						Spec.		Pin No.	Spec.	Pin No.		Spec.
										1		R(RED)/PR/CR		9		DDC 5V
	1			–				–										1	TMDS DATA 2-		13	-						1	TMDS Data2+	11	TMDS Clock Shield
										2		G(GREEN)/Y		10		GND
																		2	TMDS DATA 2+		14			+5V Power
	2		TXD				IN																					2	TMDS Data2 Shield	12	TMDS Clock-
											3	B(BLUE)/PB/CB		11		GND
																		3	TMDS DATA 2 Shield		15	Ground (for +5V)
	3		RXD			OUT																						3	TMDS Data2-	13			CEC
										4			GND	12	DDC Data
																		4	-		16	Hot Plug Detect
	4			–				–		5			GND	13		HD/CS												4	TMDS Data1+	14				–
																		5	-		17	TMDS DATA 0-
	5		GND					–																				5	TMDS Data1 Shield	15			SCL
										6			GND	14			VD
																		6	DDC Clock		18	TMDS DATA 0+
	6			–				–		7			GND	15	DDC Clock													6	TMDS Data1-	16			SDA
																		7	DDC Data		19	TMDS DATA 0 Shield
	7			–				–																				7	TMDS Data0+	17	DDC Ground
										8			GND
																		8	-		20	-
	8			–				–																				8	TMDS Data0 Shield	18	+5 V Power
																9	TMDS DATA 1-		21	-
	9			–				–																				9	TMDS Data0-	19	Hot Plug Detect
																		10	TMDS DATA 1+		22	TMDS Clock Shield						10	TMDS Clock+
																		11	TMDS DATA 1 Shield		23		TMDS Clock+
																		12	-		24		TMDS Clock-
Dimension drawings (unit: mm)
Without terminal cover																			With terminal cover

101*

481

*: Factory-defaults

179

418

101*

179

481

502

EN-65