Advanced features (continued)
Password function
This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users. The password function has 3 modes as follows.
DISPLAY INPUT .......... When the projector is turned
on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.
MENU ACCESS........... All the buttons except for the
POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention
of wrong operation by children and restriction on operation by other than specified users.
SPLASH ID SCREEN... IMAGE CAPTURE and SPLASH SCREEN in the INSTALLATION menu become unavailable. SPLASH SCREEN will be set to ON automatically.
To enable the password function:
1.Display the FEATURE menu.
2.Press the or button to select PASSWORD FUNCTION.
3.Press the or button to change the mode among DISPLAY INPUT 
, MENU ACCESS 
and
SPLASH ID SCREEN 
.
t When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password function and try again.
4.Press the ENTER button.
t The screen for setting the password function will appear.
7.Press the ENTER button.
t To cancel the procedure, press the MENU button.
8.Enter the password again for confirmation using the same steps.
9.Press the ENTER button.
t If the entered passwords don’t match, an error message will appear.
t To cancel the procedure, press the MENU button.
To cancel the password function:
1.Display the FEATURE menu.
2.Press the or button to select PASSWORD FUNCTION.
3.Press the ENTER button.
t The screen for canceling the password function will appear.
opt. |
FEATURE
DISPLAY INPUT
LOCK | ENTER |
UNLOCK | ENTER |
4.Press the ENTER button.
t The screen for entering the password will appear.
PASSWORD
1
4 | 2 | O K : ENTER |
| CANCEL : MENU |
3
5.Enter a 4 - 8 digit password using the , , and buttons.
opt. |
FEATURE
DISPLAY INPUT
LOCK | ENTER |
UNLOCK | ENTER |
5.Press the ENTER button.
t The screen for entering a password will appear.
PASSWORD
CONFIRM
1
4 | 2 | O K : ENTER |
| CANCEL : MENU |
3
6.Enter a 4 - 8 digit password using the , , and buttons.
(=1, =2, =3, =4)
tYou can enter the value by pressing the number buttons (1 to 4) while holding down the NUM button on the remote control.
(=1, =2, =3, =4)
tYou can enter the value by pressing the number buttons (1 to 4) while holding down the NUM button on the remote control.
6.Press the ENTER button.
tIf you enter a wrong password, an error message will appear.
tTo cancel the procedure, press the MENU button.
Important:
tDisable the password by pressing the MENU and ENTER buttons on the projector at the same time about 3 seconds.
