Setting up your projector (continued)
LOWER RIGHT, LOWER LEFT, UPPER RIGHT, or UPPER LEFT menu
You can adjust the horizontal or vertical position of the selected corner.
Example: Adjustment of the upper left corner position
(UPPER LEFT)
ARC menu
You can correct the arc vertically or horizontally focusing on the screen center.
|
|
|
| Press the |
|
|
|
|
|
| |
|
|
|
|
| |
Press the | button. | Press the | |||
| |||||
button. |
| button. | |||
Press the button.
When you press the or button in the RESET mode, the distortion correction is reset.
Press the button.
Press the button.
Press the button.
Press the button.
Important:
t 8IFOUIF$03/&3450/&NPEFBEKVTUNFOUUBLFT effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.
t 8IFOUIF$03/&3450/&NPEFBEKVTUNFOUJT performed, the displayed image may be distorted.
t /PJTFNBZBQQFBSPOUIFTDSFFOEVSJOHUIF
HORIZ. ORIGIN or VERT. ORIGIN menu
When the
Adjusting the origin to the horizontal arc
t 8IFOUIFIPSJ[POUBMBSDBEKVTUNFOUJTOFHBUJWF (or the ARC is adjusted in the direction)
t
Adjustment using the CURVED mode
To adjust images projected on a curved surface, press the ENTER/GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the CURVED mode, and then press the , , or button to correct the distortion.
CURVED | |
: | 0 |
: | 0 |
ARC |
|
SELECT : BLANK | |
Every time you press the BLANK button, the adjustment menu changes as follows:
ARC → HORIZ. ORIGIN → VERT. ORIGIN → RESET → ARC...
Press the button.
Press the button.
Press the button.
Press the button.
