Setting up your projector (continued)
Adjustment using the KEYSTONE mode:
When the screen and the projector are not placed perpendicularly to each other, projected images become trapezoidal. If you cannot place them perpendicularly to each other, press the ENTER/ GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the KEYSTONE mode and then press the , , or
button to correct the distortion.
KEYSTONE | |
: | 0 |
: | 0 |
KEYSTONE |
|
SELECT : BLANK | |
Every time you press the BLANK button, the adjustment menu changes as follows:
KEYSTONE → RESET → KEYSTONE ...
KEYSTONE menu
You can correct the distortion vertically or horizontally focusing on the screen center.
In the following cases (for front projection):
t 8IFOUIF,&:450/&NPEFBEKVTUNFOUUBLFT effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.
t 8IFOUIF,&:450/&NPEFBEKVTUNFOUJT performed, the displayed image may be distorted.
t %FQFOEJOHPOUIFJOTUBMMBUJPODPOEJUJPOTPGUIF projector and the screen, a perfect rectangular image and the proper aspect ratio may not be obtained. Slight distortion can be corrected by the
t /PJTFNBZBQQFBSPOUIFTDSFFOEVSJOHUIF
t 8IFOZPVDBSSZPVUUIF,&:450/&NPEF adjustment and the
t 8IFODBSSZJOHPVUUIF,&:450/&NPEF adjustment while the option lens is in use, you may not be able to obtain a perfectly rectangular image or the correct aspect ratio. Slight distortion can be corrected by the
Press the button.
Press the button.
Press the button.
Press the button.
Adjustment using the CORNERSTONE mode:
Use this adjustment for fine adjustment of the image shape. For adjustment, press the ENTER/GEOMETRY button on the projector or the GEOMETRY button on the remote control to display the CORNERSTONE mode and then press the , , or button.
When you press the or button in the RESET mode, the distortion correction is reset.
Important:
t 5IFCFTUBEKVTUNFOUSFTVMUDBOCFPCUBJOFEXIFO the lens is positioned at the center of the lateral direction at the top in the longitudinal direction (when the projector is installed on the floor, or
at the bottom when it is installed on the ceiling). Before performing the keystone adjustment, reset the lens position to the default position by using LENS SHIFT RESET (see page 33) and then move it to the top using LENS SHIFT (see page 12).
t 8IFOUIF,&:450/&NPEFBEKVTUNFOUJTDBSSJFE out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.
CORNERSTONE | |
: | 0 |
: | 0 |
LOWER RIGHT |
|
SELECT : BLANK | |
Every time you press the BLANK button, the adjustment menu changes as follows:
LOWER RIGHT → LOWER LEFT → UPPER RIGHT →
UPPER LEFT → RESET → LOWER RIGHT ...
