Viewing video images
A. Connecting the projector to video equipment
Preparation:
tMake sure that the power of the projector and that of the video equipment are turned off.
Connecting to a video player, etc.
BNC cable (option) | Video player, or the like | ||
1 | To video output |
|
|
terminal |
| ||
To VIDEO IN | To audio | ||
connector (option) | output | ||
terminal (BNC) |
| terminals | |
|
|
| 4 |
|
|
| Audio cable |
|
|
| (option) |
| To audio | 3 |
|
| input |
|
|
terminals
1.Connect one end of a commercially available BNC cable to the VIDEO IN terminal of the projector.
2.Connect the other end of the BNC cable to the video output terminal of the video equipment.
3.Connect one end of a commercially available audio cable to the audio input terminals (L/MONO, R) of the projector.
4.Connect the other end of the audio cable to the audio output terminals (L, R) of the video equipment.
To
1 terminal
To
To audio input terminals
Video player, or the like
2To audio output terminals
4
3Audio cable (option)
When the video equipment is equipped with the
1.Connect one end of a commercially available
2.Connect the other end of the
3.Connect one end of a commercially available audio cable to the audio input terminals (L/MONO, R) of the projector.
4.Connect the other end of the audio cable to the audio output terminals (L, R) of the video equipment.
t 8IFODPOOFDUJOHBNPOPQIPOJDWJEFPEFWJDFVTFUIFXIJUF - UFSNJOBMUPDPOOFDUUIFBVEJPDBCMF 5IFTBNF audio signal is output from the channels L and R of the AUDIO OUT terminal.)
t "MTPSFBEUIFJOTUSVDUJPONBOVBMPGUIFFRVJQNFOUUPCFDPOOFDUFE t $POUBDUZPVSEFBMFSGPSEFUBJMTPGDPOOFDUJPO
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of “NO SIGNAL” may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.
