Setting up your projector (continued)
Setup adjustment
How to turn on the projector
When you have to turn on the projector for setup adjustment, see the following pages:
t 1MVHHJOHUIFQPXFSDPSE QBHF t 5VSOJOHPOUIFQPXFS QBHF t 5VSOJOHPGGUIFQPXFS QBHF
Adjusting the position of the projected image
Adjust the focus.
If the projected image is out of the screen after the adjustment, adjust the projector position or the lens position using the lens shift function.
1.Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.
ZOOM
FOCUS 
FAST
SELECT:ENTER
2.Adjust with the or button to get a fine picture. t 8IFOUIF&/5&3CVUUPOJTQSFTTFEXIJMF
the ZOOM/FOCUS menu is displayed, the adjustment mode is switched between FAST
and STEP. When FAST is selected, the speed of focus controlled by the or button becomes fast, and it becomes slow when STEP is selected.
3.Press the LENS SHIFT button.
t
LENS
SHIFT
FAST
SELECT:ENTER
4.Press the , , or button to move the image
position.
t 8IFOUIF button is pressed, the image
moves down.
t 8IFOUIF button is pressed, the image
moves up.
t 8IFOUIF button is pressed, the image moves
to the right.
t 8IFOUIF button is pressed, the image moves to the left.
t
is selected, the lens shifts in a large amount with the , , or button, and it shifts in a small amount when STEP is selected.
t
t #FDBSFGVMOPUUPCFDBVHIUJOUIFPQFOJOHJOUIF lens while the lens is moving.
t 8IJMFUIFMFOTTIJGUJTXPSLJOHUIFTDSFFONBZ flicker.
t 8IFOUIF5&451"55&3/CVUUPOPOUIFSFNPUF control is pressed, the test pattern is displayed. Each time you press the TEST PATTERN button, the display switches in the order of “cross hatch (green)” → “cross hatch (red)” → “cross hatch (blue)” → “vertical color bars” → “normal screen”
→… When you press the ZOOM/FOCUS button or LENS SHIFT button at this time, you can adjust the zoom, focus, or lens shift with the test pattern displayed.
t 8IFOZPVBEKVTUUIFJNBHFQPTJUJPOCFZPOEUIF movable range of the lens shift, the triangle mark in the dialog box blinks. You cannot adjust the image position any further in the direction of the blinking triangle mark.
Changing the AUTO POWER OFF setting
The AUTO POWER OFF function of this projector is enabled by default.
Change the AUTO POWER OFF setting as necessary. (See page 33.)
To change the AUTO POWER OFF setting:
(See page 31 for menu setting.)
1.Display the INSTALLATION menu.
2.Select AUTO POWER OFF by pressing the or button.
|
| AUTO POWER OFF | 5min |
|
| ||
|
|
|
|
3.Select your desired item by pressing the or button.
