Replacing the lamp (continued)
When removing the lamp from the ceiling-mounted projector
When removing the lamp from the
t "TTFNCMFUIFMBNQSFQMBDFNFOUUSBZBDDPSEJOHUPUIFQSPDFEVSFTIPXOPOJU
1.Follow steps 1 to 3 on page 54.
2.Attach the lamp replacement tray to the projector as shown in the figure.
3. Secure the lamp replacement tray on the projector using the tape
packed with the tray.
Tape
4. Pull out the lamp box by the handle while holding the projector. t Hold the lamp replacement tray to prevent glass fragments
from scattering.
t Don’t put the lamp directly on the lamp replacement tray because it may fall.
5.Detach the lamp replacement tray together with the removed lamp.
6. Follow steps 5 to 7 on page 54.
Important:
t When the projector is installed at other setting angles, replace the lamp referring to “To replace the lamp.”
