These 2 parts push against the mullion of the neighboring screen.
This hooks under the bump in the mullion
Figure 6 SRT-100, Screen Removal Tool
Lamp Replacement, Rear Access, Any Screen Type
1.Turn off the power
2.Unplug power cord
3.Remove the rear access cover
4.Remove the lamp access door
5.Detach the lamp cable
Switch off the
Remove the AC power cord from the display.
Unfasten the 9
On the right side of the optical engine is the lamp access door. Pull on the latch to open and remove the door.
Using two fingers to unlock the lamp cable connector clamp, use a third finger to pull the connector away from the lamp.
The lamp cable will remain connected to the optical engine.
69
