Adjust the Phase, Press Prev Menu | Clarity WN=5230-S instruction

WN-5230-S VideoWall User’s Guide

2.Display an image containing many on/off (black/white) transitions

3.Press the remote control FREQ button

4.Press the left/right arrow keys

Afine-grain checkerboard pattern works best. One of the “fill” patterns in Windows 95 Paint has this. Start the Paint program found under Accessories. Select Image, Attributes, Black and White, OK, Yes. Select View and see that Color Box is checked. Choose the Fill tool (paint jar spilling over). In the bottom row of black/white shades, click the 9th box from the left. Click in the drawing area. Choose View, View Bitmap to fill the computer screen with this pattern.

With MAC OS 8.0, look for a checkerboard pattern in File, Control Panel, Desktop Patterns.

With Sharpness on (X), you will see vertical bands in the pattern, if the FREQ setting is not correct and does not match the input source,.

The FREQ adjustment menu is displayed.

The vertical bands will disappear when the frequency matches the incoming signal. For most computer inputs, this will be when the FREQ number is either 064 or 096. However, it is important to get rid of the vertical bands; the number is not important.

5. Press PREV MENU	Exit the FREQ menu.

Adjust the Phase

Source Select

Frequency

Phase

Input Level

Position

Zoom

Wall Processor

Color Balance

Curtain

Hours

Save Config

Recall Config

Reset Config

Misc Control

About

Phase Select

028

43

Image 51

Clarity WN=5230-S manual Adjust the Phase, Press Prev Menu

Contents

VideoWall Digital Light ProcessingTM Display Page Iii Page Table of Contents CLARITY’S BIG Picture RS-232 Control Viii Introduction Product Introduction Options and Accessories Warnung Safety Gefahr Warnung Clarity Visual Systems WN-5230-S VideoWall User’s Guide Quick Start WN-5230-S VideoWall User’s Guide Site Preparation Power Voltage Range Power Consumption Temperature and Humidity FlooringClearance Cables and Signals Optical Alignment LD1 LS1 LS2 LD2 Adjusting the Image Keystone, right side wider Keystone, top widerKeystone, bottom wider Keystone, left side wider Up, down, right, left Size Final Position Adjustment SummaryRotation Keystone WN-5230-S VideoWall User’s Guide Mechanical Setup, Standard Screen Mechanical Setup For added stability… Using both hands…Grasp the screen on each side at the bottom Slip fingers between the screen frame Reinstall screens Mechanical Setup, Ultra-Thin Mullion or Blackscreen Basic Steps for Alignment Alignment Procedure in Detail Clarity Visual Systems WN-5230-S VideoWall User’s Guide Clarity Visual Systems WN-5230-S VideoWall User’s Guide Clarity Visual Systems WN-5230-S VideoWall User’s Guide Operation Power-On Operation Adjust the Input Signal Settings Source On the remote control, press Input Level Input Level Adjust the Black Input Level PC, MAC or Rgbs Data Adjust the White Input Level PC, MAC or Rgbs Data Display an all-white image from the signal sourceSelect Auto Exit from the Black Level menu Comp Video/S-Video Level Adjustment WN-5230-S VideoWall User’s Guide Adjust Hue Adjust Saturation Set the Sharpness Turn Sharpness on Adjust the Frequency Press Prev Menu Adjust the Phase Position the Image Zoom Scale the image Adjust the ColorsPress the Up/Down Arrow keys Press Enter Color Increase will Decrease will Displays Adjust the nextBright display System WN-5230-S VideoWall User’s Guide Save 800x600 Save, Recall, or Reset the Settings Save Are you sure? Yes No Sure Turning off the Display, Entering Standby Mode Turning off the Main Power SwitchTurning off the System WN-5230-S VideoWall User’s Guide Build the wall Disable wall modeReset Zoom Center the image Clarity’s Big Picture Set the Wall Size on each display Wall Processor Loop-Thru of Source Video Save the settings LOOP-THRU Turn on power Installing Big Picture Option KeyTurn off the power Plug in the connector Curtain Other Features Adjustments Select On the remote Enable MonitorMonitor Select Press MON SEL Miscellaneous Controls Off Keys Reset Lamp Hours About Lamp Cleaning and Maintenance Compartment hood Lamp Replacement, Front, Standard Mullion ScreensAccess door Screen frame Removing a Standard Screen Using the Screen Removal Tool SRT-100, Screen Removal Tool Lamp Replacement, Rear Access, Any Screen Type Air Filter Air Filter Replacement, Front Access Remove the rear Cleaning the Screen and MirrorsAir Filter Replacement, Rear Access Access cover Power and Start-Up Problems Troubleshooting Standby-delay mode AC power toTurn on main power Switch Data to it Electronics turnOn the DLP engine Start sending Standby LED Fan LED Lamp LED Indication Follow these steps in order. Check Image Problems WN-5230-S VideoWall User’s Guide Technical Support Technical Support Request Rgbs Connector Pinouts MAC RS-232 OUT RS-232 Video Rear Panel Indicators, Connectors and Controls Rear Panel IndicatorsInterface and Controls Source Connector Description Rear Panel Connectors Remote Control Functions Remote-ControlRear Panel Controls Remote Button Description Frequency On-Screen Menus and Messages Source Absent BNC Rgbs Menus This menu shown only when selected source is PC, MAC or Rgbs Yes, then press Enter Ntsc Ntsc PAL Secam Left-right arrows select source to reset WN-5230-S VideoWall User’s Guide RS-232 Control ETX 06 PON RS-232 Control Items RS-232 Commands RCA 103 ERR WN-5230-S VideoWall User’s Guide 105 Optical Specifications Mechanical Picture Control Environmental BNC Electrical Declaration of Conformity Regulatory Information Other Certifications FCC Regulations ACK Index 113 VGA