Clarity Visual Systems
WARNUNG Im Innern des Monitors liegt gefährliche Hochspannung an. Falls Sie unter Hochspannung stehende Teile berühren, können Sie einen elektrischen Schlag erhalten bzw. Verbrennungen oder sogar den Tod erleiden. Im Innern befinden sich keine Teile, die von einem Laien gewartet oder repariert werden könnten. Überlassen Sie alle Wartungs- und Reparaturarbeiten einem qualifizierten Techniker.
Temperature and Humidity
The WN-5230-S is designed to operate over an ambient temperature range of 0° to 35° C (32° to 95° F) and between humidity of 20 to 80 % R.H. non- condensing.
The air that cools the display and the warm exhaust air is passed through the back of the WN-5230-S. This area should not be blocked. If the display becomes overheated, permanent damage to the product may result.
Some types of environmental lighting, such as incandescent, or high intensity discharge lamps such as metal halide or mercury vapor lamps, create high temperatures and this can cause excessive heating of the WN-5230-S. The displays should be positioned far enough away from high-temperature lights to prevent heat buildup.
Nearby heat sources can cause high operating temperatures in the WN- 5230-S. Minimize the display’s exposure to heating ducts, radiators, or other external heat sources.
Flooring
Atypical WN-5230-S weights approximately 120 lbs. (55 kg). Before installing the WN-5230-S, determine the structural integrity of the flooring where it will be used. The floor should be level and strong enough to support the combined weight of the number of displays and other equipment used in the installation. Take special care when installing a WN-5230-S in a wall configuration on a temporary structure such as a stage floor, where the flooring could bend or collapse under the weight of the installation. The maximum number of WN-5230-S’s stacked vertically in a wall configuration resting on a temporary floor should be no more than 4.
Clearance
Normal maintenance, such as lamp and air filter replacement, can be performed from either the front or rear of the WN-5230-S. However, the units with Ultra-Thin Mullion screens are serviceable only from the rear. A minimum of 4 feet of clearance is recommended for easy front access and for easy rear access a minimum of 3 feet is recommended.
