Clarity Visual Systems
Source Select
Frequency
Phase
Input Level
Position
Zoom
Wall Processor
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
If the display has Big Picture, you will see a menu like this:
Wall Processor
Wall Size: |
|
Horizontal: | 002 |
Vertical: | 002 |
Current Unit: | 01 |
Misc: |
|
[ ] Calc wall | pos |
[ ] Wall mode |
|
If this unit does not have Big Picture, you will see a menu like this:
The Big Picture option is not installed. Please see the About menu for contact information on purchasing the Big Picture option.
9.Put each display into Wall Move the menu cursor to the Calc wall pos line and
Mode | press the ENTER button. This calculates the position of |
| the selected display within the image and puts the |
| display into Wall Mode. Each display will now show |
| only its segment of the overall image. |
| Do this with each display in the wall and exit the Wall |
| Processor menu. |
10.Fine tune the wall image If the previous steps were done correctly, the image in each display should not need to be adjusted by more than two lines or pixels in any direction.
If an adjustment to the image must be made, use the Zoom menu to move only the edge that needs adjustment.
56September 1999
