WN-5230-S VideoWall User’s Guide
7.Set each display’s address (See note below for walls larger than 4x4.)
Assign each display a unique address using the Unit ID knob. Both the Group and Unit ID numbers are used
The address of the display in the upper left corner (as seen from the front) must be zero. The addresses of the other displays must increase left to right, top bottom, increasing by one for each display. Therefore, the display in the lower right corner (as seen from the front) always has the highest address.
2x2 example ∃
(Seen from the front)
3x3 example ∃
| 00 | 01 |
|
|
|
| 02 | 03 |
|
|
|
|
|
|
0 | 1 | 2 |
3 | 4 | 5 |
|
|
|
6 | 7 | 8 |
8.Set the Wall Size on each display
Open the Wall Processor menu. Enter the horizontal and vertical wall size. Each display’s menu should show the same horizontal and vertical wall size.
Each display should show a different Current Unit value. This value represents its location in the wall.
Note: Clarity’s Big Picture handles up to a 6x6 video wall. Because the Unit knob only has 16 positions, the Group knob must be used for all walls that have more than 16 displays. A 6x6 wall would be numbered like this (top number is Group; bottom number is Unit):
00 | 01 | 02 | 03 | 04 | 05 |
|
|
|
|
|
|
06 | 07 | 08 | 09 | 0A | 0B |
|
|
|
|
|
|
0C | 0D | 0E | 0F | 10 | 11 |
|
|
|
|
|
|
12 | 13 | 14 | 15 | 16 | 17 |
|
|
|
|
|
|
18 | 19 | 1A | 1B | 1C | 1D |
|
|
|
|
|
|
1E | 1F | 20 | 21 | 22 | 23 |
|
|
|
|
|
|
55
