Clarity WN=5230-S manual On-Screen Menus and Messages, Frequency

WN-5230-S VideoWall User’s Guide

On-Screen Menus and Messages

Source Select

Frequency

Phase

Input Level

Position

Zoom

Wall Processor

Color Balance

Curtain

Hours

Save Config

Recall Config

Reset Config

Misc Control

About

Menu Selection

The main menu can be accessed by pressing the MENU button. Each sub-menu can be selected by scrolling to it with the Up/Down arrow keys and pressing the ENTER button.

Description

Source Select	Selects the type of input source, SVGA , MAC or RGBS, composite
	video or S-video
Frequency	Sets the display’s video clock frequency to match the source. Sets the
	displayed number of pixels per line of video.
Phase	Used to synchronize the WN-5230-S internal system clock to the clock
	phase of the incoming signal.
Input Level	Displays the Input Level menu, where a black and a white image from
	the source are used to calibrate the display to the source. It sets the
	minimum and maximum video voltage level that the source is capable
	of sending to the display.
	Note – The Black Level must be set before the White Level is
	calibrated!
Position	Adjusts the horizontal and vertical position of the displayed image.
Zoom	Changes the image size at all four sides, changing one side at a time,
	or both opposite sides together.
Wall Processor	If Big Picture option is installed, this opens a menu to turn Wall Mode
	on or off. Also set the horizontal and vertical size of the wall and force
	display to calculate its position.
Color Balance	Displays the Color Balance menu, to allow color and luminance
	matching among multiple WN-5230-S’s.
Curtain	Displays a black screen instead of the source video.
Hours	Displays the Lamp Hours and System Hours menu.
Save Config	Saves the configuration for each video-input source. After saving, the
	WN-5230-S may be power cycled without loosing the settings

89