Clarity WN=5230-S manual Options and Accessories

Options and Accessories

Clarity’s display products can be upgraded with several accessories. See your reseller or visit www.ClarityVisual.com for a current listing of available options.

!Ultra-Thin Mullion Screen – There are three screen options:

•The standard screen has a mullion 1/8” (3 mm) wide. The mullion is a strip of sheet metal surrounding the screen which holds it in place.

•The Ultra-Thin Mullion Screen, or mullionless screen, does not have the 1/8” (3 mm) strip of sheet metal around the screen. The edge of the screen goes right to the edge of the display unit, which makes the lines between display units almost invisible in the finished video wall.

•BlackScreen™, a mullionless screen as above, but with a higher contrast ratio.

!S/300 - Video Input Module

This adds three new inputs – composite and S-video in NTSC, PAL, and SECAM – and a 15.75 kHz line-doubling capability for RGBS.

!Clarity’s Big Picture™

Big Picture spreads a single video source over an entire video wall, eliminating the need for an external processor. (All display units in the video wall must have this option.) The S/300 option, above, is included with Big Picture.

!SRT-100 Screen Removal Tool

This tool makes it easy to remove the normal mullion screens when the displays are used in video walls, where units are placed directly adjacent to each other. The SRT- 100 minimizes the chance of damaging the screen and the screen’s latches. (Used with standard mullion screens only.)

!SAT-500 Screen Alignment Tool

This tool is essential to properly position the display units with the Ultra-Thin Mullion Screen in a video wall. It assures the correct spacing between adjacent screens in the assembled video wall. (Used with Ultra-Thin Mullion screens only.)

!BAS-520 Base for the WN-5230-S

The BAS-520 provides a permanent attachment to flooring.

2September 1999