MODEL H6190 |
INDUSTRIAL AIR |
SCREWDRIVER |
INSTRUCTION SHEET |
EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected 
operation during service!
EXPLOSION HAZARD!
Never exceed 90 PSI!
Introduction
This Air Screwdriver features 1,200 RPM free speed,
Figure 1. Model H6190.
This Industrial Air Screwdriver MUST have 3-4 drops of oil directly dropped into the air fitting before each use as shown in Figure 2.
Inventory |
| |
A. | Industrial Air Screwdriver | 1 |
B. | 1⁄4" NPT Air Fitting | 1 |
C. | Phillips Head Drivers | 2 |
Figure 2. Lubricating directly into air fitting.
Operation
Screw the 1⁄4" NPT Air Fitting on the air inlet of the screwdriver. Pull the knurled collar back into the screwdriver body and insert the Phillips head driver into the socket. Twist the adjustment dial to set the torque to your desired setting.
If you need help with your new pneumatic tool, call our Tech Support at: (570)
COPYRIGHT © MAY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8257 PRINTED IN TAIWAN