Ryobi TS1343L manual OPERATOR’S Manual, Save this Manual for Future Reference

Page 1

OPERATOR’S MANUAL

10 in. Compound Miter Saw

TS1343L - Double Insulated

Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

Thank you for your purchase.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction WarrantyRead ALL Instructions General Safety Rules Blade Coasts After Being Turned OFF  Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Specific Safety RulesSpecific Safety Rules Symbol Signal Meaning SymbolsDouble Insulation ElectricalElectrical Connection Extension CordsGlossary of Terms Product Specifications FeaturesAMP Motor Know Your Compound Miter SAWBevel Lock Knob Blade Wrench StorageTools Needed AAA Batteries Dust BAG Blade Wrench Loose PartsUnpacking AssemblyMounting Holes Trace HolesWork Clamp Dust BAGTighten Miter Dust BAG Exhaust PortAligning the Laser Guide Line Installing Batteries in LaserBatteries Compartment Cover Screw Laser Line See Figures 13 To Install / Replace the BladeSee Figures 15 Squaring the Miter Table to the FenceView of Miter Table Square with Fence Socket Head Screws Fence Squaring the SAW Blade to the FenceSee Figures 18 Framing Square Miter Tablemiter Lock HandleSquaring the Blade to THE MITER Table Indicator Screw Blade Scale IndicatorbevelCombination Square Miter Table Miter Lock Handle See Figures 22Applications OperationTo Cross CUT Cross CUTSee Figures 27 To Bevel CUTBevel Bevel CUTSee Figures 29 To Compound Miter CUTCompound Miter CUT Work Clamp45 X 45 Compound Miter CUT Long Workpiece Workpiece Supports To Support Long WorkpiecesCutting Compound Miters COMPOUND-ANGLE Settings for Popular StructuresPitch Number of Sides Laying Molding Flat on the Miter Table Cutting Crown MoldingCeiling Fence Right SIDE, Outside Corner Miter Table Inside FenceClamping Wide Workpieces Cutting Warped MaterialSee Figures 33 WrongPivot Adjustments Travel Pivot Adjustment AdjustmentsBevel Pivot Adjustment Positive Stop AdjustmentsLaser Adjustment Screw To Adjust the Laser GuideGeneral Maintenance MaintenanceBrush Replacement CAP Brush AssemblyService Model NO. and Serial no