Kawasaki 840089-1HR manual Important Safeguards

Page 15

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work

areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite

the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger

that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of

any other batteries may create risk of fire.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is in the locked or “OFF” position before inserting battery pack. Carrying power tools with your finger on the switch

or inserting battery pack into a tool with the power switch “ON” invites accidents.

4

Image 15
Contents 19.2V BATTERY-OPERATED Reciprocating SAW Congratulations Table of ContentsGeneral Safety RULES-FOR ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsWork Area Important SafeguardsElectrical Safety Save These Instructions for Future ReferenceSafety Rules for Cordless Reciprocating Saws Personal SafetyService Specific Safety Rules AND/OR SymbolsSymbols Symbol Name ExplanationName Explanation Component Model Number Functional Description BatteryAccessories Controls and ComponentsRemoving / Attaching Battery Pack Charging Battery PackCharger Operating the Reciprocating SAW AssemblyVariable Speed Trigger Switch Attaching / Removing BladeMetal Cutting General CuttingPut on eye protection Plunge CuttingTool Current Rating Maintenance and CleaningAccessories SpecificationsYear Limited Warranty Other Consumer DO-IT-YOURSELF DIY ToolsCommercial or Rental Purpose Exclusions 19.2V 2-SPEED BATTERY-OPERATED Drill General Safety Rules for ALL Battery Operated Tools Year Limited WarrantyImportant Safeguards Tool accidentally Safety Rules for Cordless Drill / DriversReaction torque of the tool could crush your hand or leg At high velocity striking you or a bystanderComponent Functional DescriptionApproved chargers with your product REMOVING/ATTACHING Battery PackOperating the Drill Charging Battery Pack AssemblyCharge Battery Pack Installing Drill BIT Into Keyless ChuckScrewdriving Torque SettingsForward / Reverse and Trigger Lock Lever HIGH/LOW Speed Gear ShiftingHints for Optimum USE Drilling MetalDrilling Masonry Drilling WoodConductor Size in A.W.G Year Limited Warranty Warranty Disclaimers 19.2V Battery Pack Congratulations Symbols Which Extend Beyond the Description on the Face Hereof Year Limited Home USE WarrantyWarranty Disclaimers