resistance path to carry electricity away from the user, reducing the risk of elec- tric shock. (See Figure A.)
2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.)
3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.)
THIS PRODUCT |
|
| |
DOES NOT |
| 120 VOLT, | |
USE A |
| ||
| GROUNDED, | ||
| |||
| ELECTRICAL OUTLET | ||
| |||
|
|
| |
|
|
|
|
FIGURE A
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
4.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.)
5.Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.)
THIS PRODUCT
USES A
GROUNDED,
ELECTRICAL OUTLETS
FIGURE B
SKU 95004 | For technical questions, please call | PAGE 9 |