8.Before using the Circular Saw, check to make sure the Saw Blade is prop- erly mounted on the Spindle. Make sure the Saw Blade is sharp, and is not cracked or bent.
9.Industrial applications must follow OSHA guidelines.
10.When cutting a large workpiece, make sure its entire length is properly supported.
11.When using the Circular Saw, always maintain a firm grip on the tool with both hands.
12.Do not use the Circular Saw if it has been dropped, damaged, left outdoors, or immersed in liquid.
13.To avoid electrical shock, do not handle the Circular Saw or its Power Cord Plug with wet hands.
14.To avoid injury, always wear heavy duty work gloves when changing Saw Blades.
15.Make sure the workpiece is free from nails and any other foreign objects which can damage the Saw Blade.
16.Always check to make sure there are no electrical wires or cables in the cutting path of the Circular Saw.
17.Allow the Saw Blade to run up to full speed before feeding it into a workpiece. When turning off the Circular Saw, allow the Saw Blade to stop on its own. Do not press against the Saw Blade to stop it.
18.Turn off the Circular Saw and allow the Saw Blade to completely stop if the Saw Blade is to be backed out of an uncompleted cut.
19.Never attempt to remove material stuck in the moving parts of the Circular Saw while it is plugged in and running.
20.NEVER stare into the Laser Beam. Never aim the Laser at any person or animal.
21.Always ensure the Laser Beam is aimed at a sturdy workpiece without a reflective surface. Bright, shiny, reflective workpieces are not suitable for Laser use as the surface could reflect the beam back at the operator.
22.Always unplug the Circular Saw from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 95004 | For technical questions, please call | PAGE 6 |