Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. Pulling the trigger hard when the lock off button is not pressed causes switch damage.
To start the tool, simply push the lock off |
|
|
button then pull the trigger. Release the |
| Lock off button |
|
| I |
|
| Switch trigger |
|
| I, |
| ||
| / / | |
|
| |
Cutting operation
CAUTION:
Check carefully that the blade is adequately secured in position before inserting the bat- tery into the tool.
Turn the tool on without the blade making | I | / |
any contact. Rest the base flat on the work- | ||
piece and gently move the tool forward |
|
|
along the previously marked cutting line. |
|
|
Cutting line
CAUTION:
*Always hold the tool with the base flush with the workpiece. Failure to do so may cause a slanted cutting surface and blade breakage.
*Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may cause a slanted cutting surface and blade breakage.
10