Metal cutting
Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant.
Anti-splintering device
To reduce the potential for workpiece sur- face splintering, the
Plastic base plate (optionalaccessory) Use the plastic base plate when cutting decorative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. To replace the base plate, remove the four screws with the hex wrench.
Guide rule (rip fence; optional accessory) When cutting widths of under 150 mm
13