Panasonic EY3551-U1, EY3552-U1 specifications Ref. No a Procedure 1A Blade removal, EY3551 EY3552

Page 3

EY3551-U1 / EY3552-U1

3 DISASSEMBLY INSTRUCTIONS

■BLADE REMOVAL.

Ref. No. 1A	Procedure 1A	Blade removal.
		NOTE :
			Make sure that the battery pack is removed from the saw prior
			to servicing.
			The blade will be hot right after cutting. Be sure to let the blade
			cool down before removing it.
		1.	Hold the spindle lock button down. This prevents the blade from
		rotating.
		2.	Use the provided hex wrench to loosen the hex bolt.
		NOTE :
			Keep the hex wrench in the storage slot on the body when not
			using it.
		3.	Remove the hex bolt and outer washer.
		4.	Use the lower guard lift lever to open the lower guard.
		5.	Carefully remove the blade.
		CAUTION:

Be careful to avoid cutting your hands on the blade.

<EY3551>

<EY3552>

3

Image 3

Contents EY3551-U1 EY3552-U1 EY3551 EY3551 EY3552 Ref. No a Procedure 1A Blade removalLoosen the base depth adjustment lever where located under Ref. No C Procedure 2A → 2C Removal of the Housing Ref. No B Procedure 2A → 2B Removal of the shoeTake out the motor rotor assembly from the motor stator Ref. No a Procedure 3A Assembly of the motor assembly Assembly InstructionsRef. No C Procedure 3A → 3B → 3C Assembly of the switch Tighten the 7 frearson housing screws and 1 + head screw EY3551-U1 / EY3552-U1 EY3551-U1 / EY3552-U1 Refer to Wiring Connection Diagram EY3551-U1 / EY3552-U1 Exploded View & Replacement Parts List Replacement Parts List for EY3551 Exploded View for EY3552 Replacement Parts List for EY3552