Panasonic EY3551-U1, EY3552-U1 Tighten the 7 frearson housing screws and 1 + head screw

				EY3551-U1 / EY3552-U1
Ref. No. 3D	Procedure 3A → 3B → 3C → 3D	Assembly of the off lock lever.
		1.	Put the off lock lever into the housing boss.
		2.	Insert the one side of lever spring into the groove of the off lock
		lever. And Hitch the other side of lever spring on the housing rib.
		3.	Greasing (Shell Alvania) on top of pin and insert it into housing
		boss.

Ref. No. 3E	Procedure 3A → 3B → 3C → 3D → 3E	Assembly of the housing.
		1. Tighten the 7 frearson housing screws and 1 (+) head screw.
		NOTE:

Before closing the housing A and B, make sure that the O-ring is set properly.

Make sure if battery terminals are set on housings.

9