Chicago Electric 94488 operating instructions Figure E

b.Remove the Spark Plug Wire (18). Then, unscrew and remove the Spark Plug (2B). (See Figure E.)

c.Clean off the carbon build-up on the Spark Plug (2B). (See Figure E.)

d.Check the electrode gap to see if it is 0.020”. If necessary, readjust.

(See Figure E.)

e.Replace the Spark Plug (2B) after every 100 operating hours, or earlier if the electrodes are badly eroded (a Bosch WSR 6 F or NGK BPMR 7A is recom- mended for replacement). (See Figure E.)

f.Replace the Spark Plug (2B), Spark Plug Wire (18), and Spark Plug Cover (4D).

(See Figure E.)

FIGURE E

SPARK PLUG

COVER

(4D)

SPARK PLUG WIRE

(18)

SPARK PLUG

(2B)

0.020”

6.When storing the Saw, make sure to store the unit in a clean, dry, safe location out of reach of children and other unauthorized people. For long periods of storage, drain and clean the Fuel Tank (2C, 10C).

7.CAUTION! All maintenance, service, or repairs not mentioned in this manual must only be performed by a qualified service technician.

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 16