Delta 36-220 instruction manual Compound Miter Saw

Page 1

10" Compound Miter Saw

(Model 36-220)

INSTRUCTION MANUAL

PART NO. 900327 - 01-01-01

Copyright © 2001 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 23
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Compound Miter Saw Always Wear EYE Protection Safety RulesAdditional Safety Rules for Compound Miter Saws Extension Cords Connecting Compound Miter SAW To Power SourceOperating Instructions Foreword Assembly InstructionsUnpacking Assembling Lower Blade Guard Link Assembling Stock Stop and Table Extensions Fastening Compound Miter SAW To Supporting Surface Assembling Accessory Work Clamp to SAWAssembling Dust BAG Starting Stopping SAW Operating ControlsTilting Cutting ARM for Bevel Cutting Rotating Table For Miter CuttingTWO Position Fence Locking Cutting ARM Down PositionAdjusting 90 and 45 Degree Bevel Stops AdjustmentsAdjusting Fence 90 Degrees to Blade Adjusting Blade Parallel to Table SlotAdjusting Sliding FIT Cutting ARM Vertical Travel Typical Operations and Helpful Hints Adjusting Downward Travel of SAW BladeCutting Crown Moulding Auxiliary Wood Fence Changing the Blade MaintenanceBrush Inspection Replacement PARTS, Service or Warranty Assistance AccessoriesPage Page Canadian PORTER-CABLE Delta Service Centers