Personal Safety
1)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while oper- ating power tools may result in per- sonal injury.
2)Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask,
3)Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your fin- ger on the switch or plugging in the power tools that have the switch on invites accidents.
4)Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
5)Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
6)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
7)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust related hazards.
Power Tool Use and Care
1)Do not force the power tool. Use the correct power tool for your ap- plication.
The correct power tool will do the job better and safer at the rate for which it was designed.
-4 -
2)Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be con- trolled with the switch is dangerous and must be repaired.
3)Disconnect the plug from the pow- er source and/or the battery pack from the power tool before making any adjustments, changing acces- sories, or storing power tools.
Such preventive safety measures reduce the risk of starting the pow- er tool accidentally.
4)Store idle power tools out of the reach of children and do not al- low persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
5)Maintain power tools. Check for misalignment or binding of mov- ing parts, breakage of parts and any other condition that may af- fect the power tools operation. If damaged, have the power tool re- paired before use.
Many accidents are caused by poorly maintained power tools.
6)Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to con- trol.
7)Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particu- lar type of power tool, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery Tool Use and Care
1)Ensure the switch is in the off posi- tion before inserting battery pack.
Inserting battery pack into pow- er tools that have the switch on in- vites accidents.
2)Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
EY7442_7450_7950(UL).indb 4