Uniden EXL 8945 1 2, 3, 4

Charge the battery pack for more than 12-15 hours before you start

using your phone.

1Press the battery cover release.

2Connect the battery pack

connector with the correct

polarity (black and red wires),

then insert the battery pack

into the battery compartment.

3Slide the battery cover forward

until it snaps into place.

4Place the handset on the base.

Make sure that the “

status

”

LED of the base unit lights, and

charging begins. Charge the

battery for at 12-15 hours.

You can place either side up

for charging the battery.

status

LED

Red

Black

Use only Uniden Battery

BT-905.

Preparing the battery pack

EXL 8945 5th 99.8.20 2:33 PM Page 13

Contents

Main INTRODUCTION TO YOUR NEW PHONE Features Introduction Controls and functions Page CONTENTS OF YOUR OWNERS MANUAL Contents GETTING STARTED Read this first Step 1 Step 2 Step 3 4 Uniden Parts Department Checking the package contents Choose the best location Setting up the base unit Connect the base unit 1 2 3 Choose the dialing mode Standard wall plate mounting 1 2 Mounting the base unit on a wall 3 4 1 2 8 9 1 2 3 4 Preparing the battery pack Battery use time (per charge) When the battery charge becomes low Cleaning the battery contacts 1 2 3 4 Making a call * 2 3 BASICS Page Private Branch Exchange (PBX) dialing From the handset 1 2 3 4 5 LDM call from the base Page 16 Handset ringer tone VOLUME Handset ringer switch Adjusting the ringer and earpiece volume Page Using the speaker phone When speaking on the base 1 When phone is ringing 2 Ringer mute 1 2 When speaking on the handset Mute On the handeset 1 4 5 1 2 3 On the base Storing phone numbers DIALING 1 2 3 4 2 3 4 Making calls with memory dialing 1 2 3 1 2 3 Erasing a stored phone number When speaking on the handset 1 When the handset is off the base CONFERENCE FEATURES When speaking on the base 1 3-way conferencing Intercom from the base to handset 2 Intercom from the handset to base 1 2 Using your EXL 8945 intercom To transfer from the handset to the base 1 2 3 To transfer from the base to the handset 1 2 3 Transferring a call 1 ADDITIONAL 2 Changing the digital security code INFORMATION Installing the beltclip Headset installation 28 Battery replacement and handling RECYCLING NICKEL- CADMIUM BATTERIES Ni-Cd Caution Note on power sources Maintenance TROUBLESHOOTING YOUR NEW PHONE Troubleshooting General SPECIFICATIONS YOUR NEW PHONE Handset At Uniden, well take care of you! 1-800-297-1023 Specifications Index