Storing phone numbers
Your EXL 8945 stores up to 10 numbers in handset plus 10 numbers in the base.
On the handeset
You must press a key within 20 seconds or the phone will return to standby. If you return the handset to the cradle, the phone will return to standby too. Press
memory and you can go to memory menu at any time.
MEMORY DIALING
On the base
status LED
1 Press and hold memory in the standby mode.
2 Enter the number you wish to store (up to 20 digits)
3 | Press memory | again. |
4 | Press the 0 to | 9 on the keypad |
| to select the memory location you | |
| wish to store the number. | |
5 The confirmation beep indicates the number has been stored.
1 Press memory .
The status LED blinks.
2 Dial the number you wish to store.
3 Press memory .
Press 0 to 9 on the keypad to select the memory location you wish to store the number.
The status LED goes out.
A confirmation beep indicates the number is stored.
| When entering numbers, you may press redial/p to |
NOTES | enter a pause in the dialing sequence. |
NOTES
You cannot store phone numbers directly into the
dialing.20
