Changing the digital security code | Uniden EXL 8945 guide

If the handset battery pack is completely discharged or the battery pack removed, the digital security code is erased.

If this happens, a new security code is set automatically the next time the battery pack is charged.

ADDITIONAL INFORMATION

Changing the digital security code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.

The first time you charge your handset, the security code is automatically set. (See page 3.)

In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.

1 Remove the handset from the base unit. Press int'com .

2 While the handset is producing the paging sound, hold int'com while placing the handset in the base unit. The paging tone stops.

Leave the handset on the base for at least 3 seconds. A new, random security code is set.

26

Image 29

Uniden EXL 8945 manual Changing the digital security code

Contents

Page Introduction Features Long Dst Controls and functions 40 41 42 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see If your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing system Standard wall plate mounting Mounting the base unit on a wall Direct wall plate mounting Status LED Preparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solvents From the handset Making a callFrom the base Other Operations Placing a call using LDM Using the Long Distance Manager LDMLDM call from the handset LDM call from the base Do not USE LongDst Button to Dial Private Branch Exchange PBX dialingFrom the handset Handset off the base Handset on the base Handset earpiece volume Adjusting the ringer and earpiece volume Redialing a call Using the speaker phone When speaking on the handset When speaking on the baseWhen phone is ringing Mute On the base Storing phone numbersOn the handeset One touch memory dialing Making calls with memory dialing Erasing a stored phone number From the handset Way conferencing When the handset is off the base Intercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling Maintenance Symptom Suggestion Troubleshooting General SpecificationsBase unit Handset V, W, X, Y, Z IndexK, L Page Page Page UCZZ01622ZZ