Choose the dialing mode, Pulse | Uniden EXL 8945 manual

Use only the supplied AD-420 AC

adapter. Do not use any other AC Polarity of the plug adapter.

Connect the AC adapter to a continuous power supply.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the TONE/PULSE switch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the TONE/PULSE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

7

Image 10

Uniden EXL 8945 manual Choose the dialing mode, If your dialing system is Set the switch to Tone, Pulse

Contents

Page Features Introduction Controls and functions Long Dst 40 41 42 Contents Base unit Read this firstHandset Checking the package contents Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing system Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Preparing the battery pack Status LED Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents From the base Making a callFrom the handset Other Operations LDM call from the handset Using the Long Distance Manager LDMPlacing a call using LDM LDM call from the base From the handset Private Branch Exchange PBX dialingDo not USE LongDst Button to Dial Handset on the base Handset off the base Adjusting the ringer and earpiece volume Handset earpiece volume Redialing a call Using the speaker phone When phone is ringing When speaking on the baseWhen speaking on the handset Mute On the handeset Storing phone numbersOn the base Making calls with memory dialing One touch memory dialing Erasing a stored phone number From the handset When the handset is off the base Way conferencing Intercom from the handset to base To transfer from the handset to the base Transferring a callTo transfer from the base to the handset Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handling Troubleshooting Symptom Suggestion Base unit SpecificationsGeneral Handset K, L IndexV, W, X, Y, Z Page Page Page UCZZ01622ZZ