Charging, EB 9B | Honeywell DN 10DY manual

3.Charging

◯When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2)

NOTE: If the pilot lamp does not light, pull out the plug from the receptacle and check if the battery is properly mounted.

◯When the battery is fully charged, the pilot lamp will blink in red slowly. (At 1-second intervals) (See Table 2)

(1)Pilot lamp indication

The indications of the pilot lamp will be as shown in Table 2, according to the condition of the charger or the rechargeable battery.

			Table 2

		Indications of the pilot lamp
Before	Blinks	Lights for 0.5 seconds. Does not light for
charging	(RED)	0.5 seconds. (off for 0.5 seconds)



While	Lights	Lights continuously
charging	(RED)



Charging	Blinks	Lights for 0.5 seconds. Does not light for
completed	(RED)	0.5 seconds. (off for 0.5 seconds)


Charging	Flickers	Lights for 0.1 seconds. Does not light for		Malfunction in the
impossible	(RED)	0.1 seconds. (off for 0.1 seconds)		battery or the charger
		■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Charging	Lights	Lights continuously		The battery temperature
impossible	(GREEN)			is high, making recharg-


(UC14YF / UC14YF2 only)				ing impossible.

(2)Regarding the temperature of the rechargeable battery.

The temperatures for rechargeable batteries are as shown in the table below, and batteries that have become hot should be cooled for a while before being recharged.

Table 3 Recharging of batteries that have become hot

Rechargeable batteries

Temperatures at which the battery can be recharged

EB 9

23°F—104°F (–5°C—40°C)

EB 9B

23°F—140°F (–5°C—60°C)

Honeywell DN 10DY instruction manual Charging, EB 9B

3.Charging

EB 9B