Honeywell DN 10DY Check the direction of rotation, Switch operation, To use for drilling metal

Page 18

3.Check the direction of rotation.

The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the selector button. The L-side of the selector button is pushed to turn

the bit counterclockwise. (See Fig. 12) (The and marks are provided on the body.)

4.Switch operation

◯When the switch trigger is pulled, the bit ro- tates.

When trigger is let loose, the bit stops.

◯The rotational speed can be controlled by vary- ing the amount that the switch trigger is pulled. Speed is low when the switch trigger is pulled slightly and increases as the switch is pulled more.

NOTE

A buzzing noise is produced when the motor is about to rotate; this is only a noise, not a machine failure.

Indication

Push

Selector

Button

[Clockwise]

Indication

Push

[Counterclockwise]

5.To use for drilling metal

◯In case you drill metal with an iron-working drill bit, apply in advance a center punch in the drilling position. You can drill metal stably since the point of the drill bit does not slip.

◯If you apply sewing machine oil or soapy water to the drill bit with a brush or an old tooth brush, the drill bit will last long.

◯When drilling a hole, it cannot be drilled more rapidly by applying more than the required force. On the contrary, the edge of the drill bit will be damaged. This will decrease operational efficiency and shorten the life of this POWER TOOL.

CAUTION:

⬤The motor rotation may be locked to cease while the Cordless angle drill is used as a drill. The motor must be burnt or the battery life must remarkably be reduced when the locked condition is continued for several seconds.

⬤Drilling a hole in the metal exerts considerable force on the edge of the hole so that the drill bit may slip from the keyless chuck. If this happens, decrease the pushing pressure on the Cordless angle drill so that the drill bit does not slip.

⬤While operating the Cordless angle drill, take care not to lock the motor. If the motor is loked, immediately turn the power off.

⬤Do tighten too strongly as the screw heads will be damaged.

⬤When pressing the tool against the object to be drilled, take care not to touch the keyless chuck with your hands.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Safety Instructions For Cordless Angle Drill Contents Meanings of Signal Words Important InformationSafety Keep Children Away Handle Tool Correctly Important Safety Instructions for Battery Charger Follow these instructions to avoid the risk of injury Disposal of the Exhausted Battery Name of Parts Battery EB9, EB9BModel Cordless Angel Drill DN10DYSpecifications Battery ChargerCordless Angle Drill DN10DY Accessories Standard AccessoriesIron-working drill bit ApplicationsPhillips bit Slotted bit Wood-working drill bitInsert the battery to the battery charger Removal and Installation Method of BatteryInsert the plug of battery charger into the receptacle Charging MethodCharging EB 9BDisconnect battery charger from the receptacle Remove the battery from the battery chargerOperation Check the attachment of the batteryBefore USE Mounting and dismounting the bitSwitch operation Check the direction of rotationTo use for drilling metal Maintenance and Inspection Service and RepairsStorage Page 10TLRD-N Page Page Service Center regarding Collec Please contact Hitachi Koki U.S.A

DN 10DY specifications

The Honeywell DN 10DY is a state-of-the-art device designed to enhance automation and control in various industrial environments. Known for its robust features and advanced technology, this device is particularly renowned in sectors that require precision and reliability.

One of the primary features of the DN 10DY is its high-performance data logging capabilities. This function enables users to monitor and record critical processes in real-time, ensuring that all necessary data is captured for analysis and reporting. It supports a wide range of data formats, allowing for seamless integration with existing systems.

In terms of communication technologies, the DN 10DY boasts multiple connectivity options, including Ethernet, MODBUS, and RS-232/RS-485 protocols. This versatility allows for easy integration into various types of networks, making it an adaptable choice for both new installations and upgrades of existing systems. The device also supports wireless communication options, ensuring flexibility in data transmission over various distances without the constraints of traditional cabling.

The DN 10DY utilizes advanced sensor technology to provide accurate and reliable measurements. Its sensors are designed to withstand harsh industrial conditions, such as extreme temperatures and humidity levels. This ensures that the device maintains optimal performance and longevity, even in challenging environments.

One of the standout characteristics of the Honeywell DN 10DY is its user-friendly interface. The device features a clear display that simplifies navigation and setup. Users can easily configure settings and monitor performance without extensive training, positioning the device as an excellent choice for operators at various experience levels.

Safety and compliance are paramount in industrial applications, and the DN 10DY meets various international standards, ensuring that users can rely on it for safe operations. Its built-in fail-safes and redundancy measures provide added security and peace of mind, reducing the risk of operational downtime due to equipment failures.

Overall, the Honeywell DN 10DY is a powerful tool for enhancing industrial automation and control. With its comprehensive features, robust communication technologies, and user-friendly design, it stands out as a reliable choice for businesses seeking to optimize their processes and improve operational efficiency.
Top Page Image Contents