Troubleshooting
PROBLEM
CAUSE
SOLUTION
Engine does not start | Parking brake not engaged. Engine | Set Brake. Consult engine manual, supplied |
| switch OFF, no gasoline or low oil |
|
|
|
|
Engine races to high rpm – stalls | Worn governor | Consult engine manual, supplied |
during operation |
|
|
|
|
|
Engine operates, Line Driver does | Low hydraulic oil | Fill with Mobil 1 |
not move forward or reverse |
|
|
|
|
|
Engine operates, Line Driver moves | Low hydraulic oil. Parking brake is set | Fill with Mobil 1 |
slowly in forward and reverse |
| parking brake. |
| Wheel release is open. | Close; hand tight. |
|
|
|
Engine shuts off when operator ex- | Safety switch | Set parking brake |
its Line Driver |
|
|
|
|
|
Engine continues to run when oper- | Safety switch | Adjust and set parking brake. Replace safety |
ator exits Line Driver and parking |
| switch and/or any connecting wires. |
brake is not set |
|
|
|
|
|
Engine misses during turns and for- | Engine oil low | Consult engine manual for proper oil |
ward and reverse changes |
|
|
|
|
|
Parking brake does not keep Line | Parking brake needs adjustment | Adjust brake. Manual 309404. |
Driver from moving |
|
|
|
|
|
Line Driver creeps in forward or re- | Control linkage needs adjustment | Adjust control linkage. Manual 309404. |
verse direction |
|
|
|
|
|