Always Wear Certified Safety EQUIPMENT | Black & Decker LDX112CR

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA

approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty.

ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3)

• ANSI S12.6 (S3.19) hearing protection

• NIOSH/OSHA/MSHA respiratory protection

Symbols

The label on your tool may include the following symbols. The symbols and their definitions are as
follows:
V			volts	A		amperes
Hz			hertz	W		watts
min			minutes		or AC	alternating current
		or DC....	direct current	no		no load speed
		or DC....	direct current	no		no load speed
			Class I Construction			earthing terminal
	.................				..................


			(grounded)		.................		safety alert symbol
	.................		Class II Construction	.../min or rpm...		revolutions or
			(double insulated)			reciprocation per minute
		.............	Read instruction manual before use		...................	Use proper respiratory protection
	.................		Use proper eye protection		..................	Use proper hearing protection

Important Safety Instructions for Battery Chargers

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.

• Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

WARNING: Shock hazard. Do not allow any liquid to get inside charger. CAUTION: Burn hazard. To reduce the risk of injury, charge only designated

Black+Decker batteries. Other types of batteries may burst causing personal injury and damage. CAUTION: Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

• DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

• These chargers are not intended for any uses other than charging designated

LDX112CR, LDX112C, LDX112C-2R specifications

Black & Decker has long been synonymous with quality and reliability in the power tool market, and the LDX112C, LDX112C-2R, and LDX112CR models are no exception. These cordless drills are designed for both DIY enthusiasts and professionals, providing exceptional performance and versatility for a variety of tasks.

One of the standout features of these models is their 20V Lithium-Ion battery, which provides ample power for extended use while maintaining a lightweight design. The battery ensures longer run times and faster charging, allowing users to complete projects without frequent interruptions. The LDX112C-2R and LDX112CR come with two batteries, making it easy to switch out for continuous operation.

The LDX112C and its variants boast a compact and ergonomic design, making them comfortable to hold and easy to maneuver in tight spaces. This design factor greatly reduces user fatigue, especially during prolonged use. Weighing in at just a few pounds, these drills are light enough for overhead work, making them excellent for various applications, whether it's drilling holes in drywall or assembling furniture.

Equipped with an adjustable clutch, the LDX112C series allows users to control the torque settings for specific tasks, preventing overdriving screws or damaging materials. The 11-position clutch provides the versatility that novice and seasoned users alike can appreciate. Additionally, these drills feature a two-speed transmission that allows for variable speeds, providing improved control for different drilling and fastening applications.

Another notable aspect is the integrated LED work light, which illuminates dark work areas, enabling users to work more effectively in low-light conditions. The 3/8-inch keyless chuck ensures that bit changes are quick and hassle-free, allowing for smooth transitions between different attachments without the need for additional tools.

In terms of technology, the LDX112C series leverages advanced lithium-ion technology, which not only enhances battery life but also supports consistent power throughout the charge cycle. This means users can expect reliable performance from start to finish.

In conclusion, the Black & Decker LDX112C, LDX112C-2R, and LDX112CR drills represent an excellent investment for anyone seeking a dependable cordless drilling solution. With their robust features, user-friendly design, and impressive battery life, these tools can tackle a variety of projects with ease, establishing them as essential additions to any toolkit. Whether you're drilling, fastening, or working on home improvement projects, these drills deliver the power and versatility needed to get the job done efficiently.