Craftsman 137.219 operating instructions Fence Assembly FIG. M, Bevel Drilling FIG. N

Page 13

FENCE ASSEMBLY (FIG. M)

1_ Align the mounting holes of the fence over the table slots.

2.Place a washer (2) on the threaded end of the knob

(3). Insert the knob through the mounting hole of the fence and the table slot.

3.Place a washer and wing nut (4) on the knob from under the table.

4.Repeat for the other knob and tighten.

Fig. M

ADJUSTMENTS mNSTRUCTmONS

NOTE: All the adjustments for the operation of the drill press have been completed at the factory. Due to normal wear and use, some occasional readjustments may be necessary.

[a,WARNmNG]

To avoid injury from an accidenta! start, ALWAYS make sure the switch is in the "OFF" position, the switch key is removed, and the plug is not connected to the power source outlet before making belt adjustments.

BEVEL DRILLING (FIG. N)

NOTE: A bevel scale has been included to measure approximate bevel angle& If precision is necessary, a square or other measuring tool should be used to position the table. To use the bevel scale (6):

1.TIGHTEN the nut (4) on the locking pin using a 10mm or adjustable wrench clockwise to RELEASE it from the table support.

2.Loosen the large hex head table bevel locking bolt (5) using a 17ram or adjustable wrench.

3.Tilt the table, aligning the desired angle measurement to the zero line opposite the scale (6).

4.Tighten the table bevel locking bolt (5).

5.To return the table to its original position, loosen the table bevel locking bolt (5). Return the table (6) to the 0° position.

6.Return nut (4) on locking pin to the OUTSIDE END OF THREADS. Gently tap locking pin until it is seated in the mating hole of the table brackeL Hand tighten nut (4).

NOTE: The table has been removed form the illustration for clarity_

Fig. N

6

J

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Safety InstructionsSECTmON SECTmONRemove Adjusting Keys and Wrenches Before Using this Drill PressAwarning Conductorwiththegreeninsulationwithorwithout Awar GIDescription Quantity AWARNmNGQS R # DDBeltspee Page Assembung Column to Base FIG. a Installing Table to Column Asseiibly FIG. B Through FFig.F Fig.DFig.H TNSTALUNGTHECHUCKFIG.J,J Andk Bevel Drilling FIG. N Fence Assembly FIG. MQuill Return Spring FIG. P Spindle / Quill FIG. OBelt TENS!ON FIG. Q Laser TracAvoid Direct EYE Contact Adjusting the Laser Lines FIG. RON/OFF Switch FIG. T Speeds and Belt Placement FIG. SInstalling Drill BIT in Chuck FIG. U Fig.U Using the Fence FIGBAS!C Operating Instructions Fig,×For Your Protection Tilting the Table FIG. CO Positioningthetable and WORKPtECEFeeding Changing the Laser Batteries FIG. DD AWARNRNGjInstalling the Chuck Problem Possible Causes RemedyAdjustments -QUILL Return Spring Tensioning Belt10 in. DRmLL Press Model no Schematic 888oSU-HOGAR 3M LoS00-LE-FOYER

137.219 specifications

The Craftsman 137.219 is a versatile and powerful table saw that appeals to both DIY enthusiasts and professional woodworkers alike. Known for its durability and precision, this tool is designed to deliver high-quality cuts while ensuring user safety and convenience.

One of the standout features of the Craftsman 137.219 is its robust 15-amp motor, which provides ample power to cut through various types of wood, including harder materials. This high-performance motor ensures consistent and smooth operation, making it ideal for both detailed work and heavy-duty projects.

The saw features a 10-inch blade, which is perfect for making a wide range of cuts, from ripping to crosscutting. The blade can be easily adjusted for height and angle, allowing users to execute bevel cuts up to 45 degrees. This adaptability makes the Craftsman 137.219 suitable for a wide variety of applications, whether for furniture making or home improvement tasks.

Safety is a top priority with the Craftsman 137.219. It comes with a sturdy blade guard that provides protection during use, and an anti-kickback mechanism to help prevent accidents. The push stick included with the saw ensures that users can keep their hands at a safe distance from the blade while making precise cuts.

Additionally, the table is made from high-quality materials, ensuring stability and minimizing vibrations during operation. The large tabletop provides ample workspace, accommodating larger workpieces and offering sufficient support for detailed cutting tasks.

Another noteworthy characteristic is the included fence system, which allows for easy and accurate alignment, ensuring that cuts are straight and true. The fence can be adjusted smoothly, making repetitive cuts a breeze, thereby increasing efficiency in any woodworking project.

The compact design and built-in wheels make the Craftsman 137.219 portable, allowing woodworkers to move it easily between work sites. This feature is particularly useful for contractors and remodelers who need to transport their tools frequently.

Overall, the Craftsman 137.219 combines power, safety, and versatility, making it an excellent choice for anyone looking to enhance their woodworking capabilities. Whether you are a seasoned professional or a passionate hobbyist, this table saw is designed to meet and exceed your expectations while delivering precision and reliability in every cut.
Top Page Image Contents