Before Using this Drill Press

GENERAL SAFETY mNSTRUCTmONS

Safety is a combination of common sense, stay alert and knowing how to use your dril! press.

[AWARN NGI

To avoid mistakes that could cause serious injury, do not plug the drill press in until you have read and understood the following.

1.	READ and become familiar with the entire instruction
	manual. LEARN the tool'sapplication, limitations and
	possible hazards.
2.	KEEP GUARDS tN PLACE and in working order.
3.	DON'TUSE tN DANGEROUS ENVIRONMENT.
	Don'tuse power tools in damp and wet locations, or
	expose them to rain. Keep work area well lighted.
4.	DO NOT use power tools in the presence	of
	flammable liquids or gases.
5.	KEEP WORK AREA CLEAN. Cluttered	areas and
	benches invited accidents.
6.	KEEP CHILDREN AWAY. All visitors should be kept
	safe distance from work area.
7.	DON'TFORCE THE TOOL. It wi!l do the job better
	and safer at the rate for which it was designed.
8.	USE THE RIGHT TOOL. Do not force a tool or an
	attachment to do a job for which it was not designed.

14.REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that keys and adjusting

wrenches are removed from the too! before turning it ON.

15NEVER LEAVE A TOOL RUNNING UNATTEND. TURN THE POWER "OFF". Don'tleave the tool until

it comes to a complete stoG

16NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

17DON'T OVERREACH. Keep proper footing and balance at al! times.

18.1VIAtNTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

1&CHECK FOR DAMAGED PARTS. Before further

use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function

=check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

2&MAKE WORKSHOP CHILD PROOF with pad!ocks, master switches, or by removing starter key&

21 .DO NOT operate the tool if you are under the influence of any drugs, alcoho! or medication that could affect your ability to use the tool properly.

22.Dust generated from certain materiai can be

9. WEAR PROPER APPAREL. Do not wear loose

clothing, gloves, neckties, rings, bracelets, or other

jewelry which may get caught in moving parts.

Nonslip footwear is recommended. Wear protective

hair covering to contain long hair.

W_AR YOUR

hazardous to your health. Always operate the drill press in a well- ventilated area and provide for proper dust removal. Use a dust collection system whenever possibb.

10.WEAR A FACE MASK OR DUST MASK. Sawing operation produces dusL

11 .DISCONNECT TOOLS before servicing; when

changing accessories such as blades, bits, cutters, and the like.

12REDUCE THE RiSK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before plugging in.

1&USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommend accessories. The use of improper accessories may cause risk of injury to persons.

2&ALWAYS WEAR EYE PROTECTION. Any drill press can throw foreign objects into the eyes and could cause permanent eye damage. ALWAYS wear Safety Goggles (not glasses) that comply with ANSi Safety standard Z87.1 Everyday eyeglasses have only impact -resistance lenses. They ARE NOT safety glasses. Safety Goggles are available at Sears. NOTE: Glasses or goggles not in compliance

with ANSI Z87.1 could seriously hurt you when they break.

137.219 specifications

The Craftsman 137.219 is a versatile and powerful table saw that appeals to both DIY enthusiasts and professional woodworkers alike. Known for its durability and precision, this tool is designed to deliver high-quality cuts while ensuring user safety and convenience.

One of the standout features of the Craftsman 137.219 is its robust 15-amp motor, which provides ample power to cut through various types of wood, including harder materials. This high-performance motor ensures consistent and smooth operation, making it ideal for both detailed work and heavy-duty projects.

The saw features a 10-inch blade, which is perfect for making a wide range of cuts, from ripping to crosscutting. The blade can be easily adjusted for height and angle, allowing users to execute bevel cuts up to 45 degrees. This adaptability makes the Craftsman 137.219 suitable for a wide variety of applications, whether for furniture making or home improvement tasks.

Safety is a top priority with the Craftsman 137.219. It comes with a sturdy blade guard that provides protection during use, and an anti-kickback mechanism to help prevent accidents. The push stick included with the saw ensures that users can keep their hands at a safe distance from the blade while making precise cuts.

Additionally, the table is made from high-quality materials, ensuring stability and minimizing vibrations during operation. The large tabletop provides ample workspace, accommodating larger workpieces and offering sufficient support for detailed cutting tasks.

Another noteworthy characteristic is the included fence system, which allows for easy and accurate alignment, ensuring that cuts are straight and true. The fence can be adjusted smoothly, making repetitive cuts a breeze, thereby increasing efficiency in any woodworking project.

The compact design and built-in wheels make the Craftsman 137.219 portable, allowing woodworkers to move it easily between work sites. This feature is particularly useful for contractors and remodelers who need to transport their tools frequently.

Overall, the Craftsman 137.219 combines power, safety, and versatility, making it an excellent choice for anyone looking to enhance their woodworking capabilities. Whether you are a seasoned professional or a passionate hobbyist, this table saw is designed to meet and exceed your expectations while delivering precision and reliability in every cut.