Craftsman 137.219 Spindle / Quill FIG. O, Quill Return Spring FIG. P, Belt TENS!ON FIG. Q

Page 14

[AWARNING

To prevent persona! injury, always disconnect the plug from the power source when making any adjustments.

SPINDLE / QUILL (FIG. O)

Rotate the feed handles counterclockwise to lower spindle to its lowest position. Hold the chuck and move it front to back. If there is excessive play, proceed with the following adjustments:

1.Loosen the lock nut (1) located on the right side of the drill press.

2.Turn the screw (2) clockwise to eliminate the play, but without obstructing the upward movement of the spindle. (A little play in the spindle is normaL)

3.Tighten the lock nut (1).

Fig.0

QUILL RETURN SPRING (FIG. P)

The quill return spring may need adjustment if the quil! return speed is too rapid or too slow.

1.Lower the table for additiona! clearance.

2.Place a screwdriver in the lower front notch (1) of the spring cap (2). Hold it in place while loosening and removing only the outer jam nut (3).

3.With the screwdriver still engaged in the notch, loosen the inner nut (4) just until the notch (5) disengages from the boss (6) on the drit! press head.

NOTE: DO NOT REMOVE THIS INNER NUT, because the spring will forcibly unwind.

4.Carefully turn the spring cap (2) counterclockwise with the screwdriver, engaging the next notch.

5.Lower the quil! to the lowest position by rotating the feed handle in a counterclockwise direction while

holding the spring cap (2) in position.

6.If the quill moves up and down as you desire, tighten the inner nut (4) sung against the spring cap and secure the outer nut (3) against the inner nut with the adjustable wrench.

NOTE: DO NOT OVERTIGNTEN and restrict quil!

movement.

 

5

Fig. P

6

1

2

IAWARNmNG

To avoid injury from an accidenta! start, ALWAYS make sure the switch is in the "OFF" position, the switch key is removed, and the plug is not connected to the power source outlet before making belt adjustments.

BELT TENS!ON (FIG. Q)

1.To unlock the belt tension, turn the belt tension lock

knob (1) on the right side of the drill press head counterclockwise.

2.Pull the motor (2) toward the front of the drill press to loosen the belt tension.

3.Position the belt on the correct pulley steps for the desired speed.

4.Push the motor away from the dril! press head until the belt is properly tensioned.

NOTE: Belt tension is correct if the belt deflects approximately 1/2 inch when pressed at its center.

5.Tighten the belt tension lock knob (1) to secure the motor in position.

Fig.Q

J 2

THE LASER TRAC®

Your tool is equipped with our latest innovation, the Laser Trac®, a battery powered device using Class

IIlaser beams. The laser beams wil! enable you to preview the drill bit path on the workpiece to be drilled before you begin your operation.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Safety Instructions Sears, Roebuck and Co., Hoffman Estates, IL 60179 USASECTmON SECTmONBefore Using this Drill Press Remove Adjusting Keys and WrenchesAwarning Awar GI ConductorwiththegreeninsulationwithorwithoutAWARNmNG Description Quantity# DD QS RBeltspee Page Installing Table to Column Asseiibly FIG. B Through F Assembung Column to Base FIG. aFig.D Fig.FFig.H TNSTALUNGTHECHUCKFIG.J,J Andk Fence Assembly FIG. M Bevel Drilling FIG. NBelt TENS!ON FIG. Q Spindle / Quill FIG. OQuill Return Spring FIG. P Laser TracAdjusting the Laser Lines FIG. R Avoid Direct EYE ContactInstalling Drill BIT in Chuck FIG. U Speeds and Belt Placement FIG. SON/OFF Switch FIG. T Using the Fence FIG Fig.UFor Your Protection Fig,×BAS!C Operating Instructions Feeding Positioningthetable and WORKPtECETilting the Table FIG. CO AWARNRNGj Changing the Laser Batteries FIG. DDAdjustments -QUILL Return Spring Problem Possible Causes RemedyInstalling the Chuck Tensioning Belt10 in. DRmLL Press Model no Schematic LoS00-LE-FOYER 888oSU-HOGAR 3M

137.219 specifications

The Craftsman 137.219 is a versatile and powerful table saw that appeals to both DIY enthusiasts and professional woodworkers alike. Known for its durability and precision, this tool is designed to deliver high-quality cuts while ensuring user safety and convenience.

One of the standout features of the Craftsman 137.219 is its robust 15-amp motor, which provides ample power to cut through various types of wood, including harder materials. This high-performance motor ensures consistent and smooth operation, making it ideal for both detailed work and heavy-duty projects.

The saw features a 10-inch blade, which is perfect for making a wide range of cuts, from ripping to crosscutting. The blade can be easily adjusted for height and angle, allowing users to execute bevel cuts up to 45 degrees. This adaptability makes the Craftsman 137.219 suitable for a wide variety of applications, whether for furniture making or home improvement tasks.

Safety is a top priority with the Craftsman 137.219. It comes with a sturdy blade guard that provides protection during use, and an anti-kickback mechanism to help prevent accidents. The push stick included with the saw ensures that users can keep their hands at a safe distance from the blade while making precise cuts.

Additionally, the table is made from high-quality materials, ensuring stability and minimizing vibrations during operation. The large tabletop provides ample workspace, accommodating larger workpieces and offering sufficient support for detailed cutting tasks.

Another noteworthy characteristic is the included fence system, which allows for easy and accurate alignment, ensuring that cuts are straight and true. The fence can be adjusted smoothly, making repetitive cuts a breeze, thereby increasing efficiency in any woodworking project.

The compact design and built-in wheels make the Craftsman 137.219 portable, allowing woodworkers to move it easily between work sites. This feature is particularly useful for contractors and remodelers who need to transport their tools frequently.

Overall, the Craftsman 137.219 combines power, safety, and versatility, making it an excellent choice for anyone looking to enhance their woodworking capabilities. Whether you are a seasoned professional or a passionate hobbyist, this table saw is designed to meet and exceed your expectations while delivering precision and reliability in every cut.
Top Page Image Contents