Craftsman 137.219 operating instructions Speeds and Belt Placement FIG. S, ON/OFF Switch FIG. T

Page 16

BASmC DRILL PRESS OPERATmONS

NOTE: This machine incorporates view windows on the pulley cover used to observe the location of the belL

[AWARN NG!

To avoid possible injury, keep guard closed and in place while tool is in operation.

SPEEDS AND BELT PLACEMENT (FIG. S)

This drill press has 5 speeds, as listed below:

620 RPM 1100 RPM 1720RPM

2340 RPM 3100 RPM

See inside of the pulley guard for specific placement of the belts on the pulleys to change speeds.

Fig. S

620RPM1100RPM1720RPM

2340RPM3100RPM

ON/OFF SWITCH (FIG. T)

The ON / OFF switch has a removable, safety switch key. With the key removed from the switch, unauthorized and hazardous use by children and others are minimized as the switch can not be turned on without the key

1.To turn the drit! press "ON", insert key (2) into the slot of the switch (1). Move the switch upward to the "ON" position.

2.To turn the driJl press "OFF", move the switch downward.

3.To lock the switch in the OFF position, grasp the sides of the safety switch key, and pult it out.

4.With the switch key removed, the switch wi!! not turn the power tool on.

5.If the switch key is removed while the drill press is running, it can be turned "OFF" but cannot be restarted without inserting the switch key.

J,AWARNING j

ALWAYS lock the switch "OFF" when the drill press is not in use by removing the safety switch key keep it in a safe place. In the event of a power failure, blown fuse, or tripped circuit breaker, turn the switch "OFF" and remove the key, preventing an accidental startup when power comes on.

Fig. T

INSTALLING DRILL BIT IN CHUCK (FIG. U)

1.With the switch "OFF" and the switch key removed, open the chuck jaws (1) using the chuck key (2). Turn the chuck key counterclockwise to open the chuck jaws (1).

2.insert the drill bit (3) into the chuck far enough to obtain maximum gripping by the jaws, but not far enough to touch the spirat grooves (flutes) of the drilJ bit when the jaws are tightened.

3.Make sure that the drii! is centered in the chuck.

4.Turn the chuck key clockwise to tighten the jaws.

[_WARNING ]

To avoid injury or accident by the chuck key ejecting forcibly from the chuck when the power is turned "ON", use only the self-ejecting chuck key supplied with this drill press. ALWAYS recheck and remove the chuck key before turning the power "ON".

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Safety Instructions Sears, Roebuck and Co., Hoffman Estates, IL 60179 USASECTmON SECTmONBefore Using this Drill Press Remove Adjusting Keys and WrenchesAwarning Awar GI ConductorwiththegreeninsulationwithorwithoutAWARNmNG Description Quantity# DD QS RBeltspee Page Installing Table to Column Asseiibly FIG. B Through F Assembung Column to Base FIG. aFig.D Fig.FFig.H TNSTALUNGTHECHUCKFIG.J,J Andk Fence Assembly FIG. M Bevel Drilling FIG. NSpindle / Quill FIG. O Quill Return Spring FIG. PBelt TENS!ON FIG. Q Laser TracAdjusting the Laser Lines FIG. R Avoid Direct EYE ContactON/OFF Switch FIG. T Speeds and Belt Placement FIG. SInstalling Drill BIT in Chuck FIG. U Using the Fence FIG Fig.UBAS!C Operating Instructions Fig,×For Your Protection Tilting the Table FIG. CO Positioningthetable and WORKPtECEFeeding AWARNRNGj Changing the Laser Batteries FIG. DDProblem Possible Causes Remedy Installing the ChuckAdjustments -QUILL Return Spring Tensioning Belt10 in. DRmLL Press Model no Schematic LoS00-LE-FOYER 888oSU-HOGAR 3M

137.219 specifications

The Craftsman 137.219 is a versatile and powerful table saw that appeals to both DIY enthusiasts and professional woodworkers alike. Known for its durability and precision, this tool is designed to deliver high-quality cuts while ensuring user safety and convenience.

One of the standout features of the Craftsman 137.219 is its robust 15-amp motor, which provides ample power to cut through various types of wood, including harder materials. This high-performance motor ensures consistent and smooth operation, making it ideal for both detailed work and heavy-duty projects.

The saw features a 10-inch blade, which is perfect for making a wide range of cuts, from ripping to crosscutting. The blade can be easily adjusted for height and angle, allowing users to execute bevel cuts up to 45 degrees. This adaptability makes the Craftsman 137.219 suitable for a wide variety of applications, whether for furniture making or home improvement tasks.

Safety is a top priority with the Craftsman 137.219. It comes with a sturdy blade guard that provides protection during use, and an anti-kickback mechanism to help prevent accidents. The push stick included with the saw ensures that users can keep their hands at a safe distance from the blade while making precise cuts.

Additionally, the table is made from high-quality materials, ensuring stability and minimizing vibrations during operation. The large tabletop provides ample workspace, accommodating larger workpieces and offering sufficient support for detailed cutting tasks.

Another noteworthy characteristic is the included fence system, which allows for easy and accurate alignment, ensuring that cuts are straight and true. The fence can be adjusted smoothly, making repetitive cuts a breeze, thereby increasing efficiency in any woodworking project.

The compact design and built-in wheels make the Craftsman 137.219 portable, allowing woodworkers to move it easily between work sites. This feature is particularly useful for contractors and remodelers who need to transport their tools frequently.

Overall, the Craftsman 137.219 combines power, safety, and versatility, making it an excellent choice for anyone looking to enhance their woodworking capabilities. Whether you are a seasoned professional or a passionate hobbyist, this table saw is designed to meet and exceed your expectations while delivering precision and reliability in every cut.
Top Page Image Contents