Craftsman 973.111471 owner manual Never USE in AN Explosive Atmosphere, Tools

Page 4

RULES FOR SAFE OPERATION (Continued)

•NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignite flam- mable liquids, gases, or fumes.

•KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean your tool.

•STAY ALERT. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.

•CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced by an authorized service center unless indicated elsewhere in this

instruction manual.

•DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

•DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication.

•DRILLING OR DRIVING SCREWS INTO

ELECTRICAL WIRING IN WALLS, CEILINGS, OR OTHER AREAS CAN CAUSE THE BIT OR

CHUCK TO BECOME ELECTRICALLY LIVE. Do not touch metal parts when drilling into a wall; grasp only the insulated handle(s) or plastic housing when using this tool. Make sure hidden electrical wiring, water pipes, and mechanical hazards are not in the path of the bit when drilling into a wall,

•INSPECT FOR and remove all nails from lumber before drilling.

IMPORTANT SAFETY RULES FOR BA'r'I'ERY

TOOLS

•Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories.

•USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substitute any other charger, Use of another charger could cause batteries to explode causing possible serious injury,

•DO NOT PLACE BATTERY TOOLS OR THEIR BATTERIES NEAR FIRE OR HEAT. They may explode.

•DO NOT CHARGE BATTERY TOOL IN A DAMP OR WET LOCATION.

•Your battery tool should be charged in a location where the temperature is more than 50°F but less than IO0°F.

•Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

•If carrying your battery tool at your side, make sure it is not running and your finger is not on the switch. Avoid accidental starting.

•SECURE WORK before applying power. NEVER hold workpiece in your hand or across your legs.

•WHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER

SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for battery charger item number

9-11065 (982033-001).

•Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger.

_WARNING: To reduce risk of injury, charge only nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing personal

injury and damage.

•Do not expose charger to rain or snow.

•Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

iTo reduce risk of damage to charger body and cord, pull by charger body rather than cord when disconnecting charger.

•Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Icrrftsmrni 972000-813 11-00Specifications No Load Speed Switch Charge Rate Maximum TorqueRemove Adjusting Keys and Wrenches Symbol Meaning Safety Alert SymbolRead ALL Instructions Never USE in AN Explosive Atmosphere Do not Charge Battery Tool in a Damp or WET LocationTools Savetheseinstructions Important Information for Recharging HOT BATrERIESBitstorage Keylesschuck Batterypack Reverse Selector Switch Trigger REDKnow Your DRILL-DRIVER Screwdriverbits Wrist StrapCharging Battery Pack Selector Switch Centerposition TriggerSwitch Lock Lock Variable SpeedTo Install Battery Pack Depresslatchesto ReleasebatterypackTo Remove Battery Pack ReversibleWhen not in use, bits provided with your drill can be Screwdriver Bits Area Installing BitsBIT Storage Chuckjaws Chuckbody Drillbit ChuckcollarAdjustable Torque Clutch To Adjust TorqueTo Decrease Torque Adjusting Ring Toincrease Level Drilling Removing BitsDrilling Chuck RemovalMallet Keyless Chuck JawsChuck Removal To Retighten a Loose ChuckBattery Pack Removal Preparation for Recycling Page Key PaN Number Description Quan Can Be Purchased Thru Rsos Retail Special Order SystemAnytime

973.111471 specifications

The Craftsman 973.111471 is a versatile and efficient tool designed for both amateur and professional users. As part of the Craftsman brand, it exemplifies the commitment to quality, durability, and performance. This tool is engineered to offer a reliable solution for a variety of tasks, making it a valuable addition to any workshop or home.

One of the standout features of the Craftsman 973.111471 is its powerful motor. This high-performance motor delivers consistent and robust power for various applications, whether you’re driving screws, drilling holes, or tackling heavier materials. The tool’s speed settings are adjustable, allowing users to customize the performance based on the specific task at hand. With multiple speed options, the Craftsman 973.111471 ensures precision and control, enhancing overall effectiveness in different projects.

Another notable technology integrated into this model is its ergonomic design. The Craftsman 973.111471 is built with user comfort in mind, boasting a lightweight structure and a comfortable grip. This design reduces fatigue during prolonged use, enabling users to work longer without discomfort. Additionally, the tool’s balanced weight distribution enhances control, allowing for more accurate operation.

The durability of the Craftsman 973.111471 is also a significant characteristic. Constructed with high-quality materials, this tool is designed to withstand the rigors of regular use. Its sturdy build ensures longevity, making it a wise investment for those who frequently engage in DIY projects or professional tasks.

Safety features in the Craftsman 973.111471 cannot be overlooked. The tool comes equipped with essential safety mechanisms that protect users during operation. These safety features enhance user confidence, allowing for a more focused work experience without the distraction of potential hazards.

Moreover, the versatility of the Craftsman 973.111471 is exceptional. It is compatible with a range of accessories and attachments, which expands its functionality beyond basic tasks. This adaptability makes it suitable for various projects, from woodworking to metalworking, thus catering to a broad spectrum of users.

In conclusion, the Craftsman 973.111471 stands out as a reliable tool equipped with a powerful motor, ergonomic design, and built-in safety features. Its durability and versatility ensure that it meets the demands of diverse tasks with precision and efficiency. Whether for hobbyists or professionals, this tool represents an excellent choice for those seeking a dependable companion in their crafting and construction endeavors.
Top Page Image Contents