Craftsman 973.111471 owner manual Chuck Removal, To Retighten a Loose Chuck

Page 12

CHUCK REMOVAL (Continued)

Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 14.

_i WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other

part may create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating

oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

Only the parts shown on parts list, page 15, are intended to be repaired or replaced by the customer.

All other parts should be replaced at a Sears Service

Center.

Fig. 14

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on spindle and develop a wobble. Periodically check chuck screw for tight- ness. A loose chuck screw may cause the chuck jaws to bind and prevent them from closing.

To tighten, follow these steps:

Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 2.

Open the chuck jaws.

Insert hex key wrench into chuck and tighten chuck jaws securely. Tap hex key wrench sharply with a mallet in a clockwise direction. This wil! tighten chuck on the spindle.

Open the chuck jaws and remove hex key wrench.

Tighten the chuck screw.

Note: The chuck screw has left hand threads.

,_ WARNING: Do not attempt to modify this tool or create accessories not recommended for use

with this tool. Any such alteration or modification is misuse and could result in a hazardous

condition leading to possible serious personal

injury.

BA'I-rERIES

Your drill'sbattery pack is equipped with 11 nickel- cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

Store and charge your batteries in a cool area. Temperatures above normal room temperature will shorten battery life.

Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

12

Image 12
Contents Icrrftsmrni 972000-813 11-00Specifications No Load Speed Switch Charge Rate Maximum TorqueSymbol Meaning Safety Alert Symbol Remove Adjusting Keys and WrenchesRead ALL Instructions Do not Charge Battery Tool in a Damp or WET Location Never USE in AN Explosive AtmosphereTools Savetheseinstructions Important Information for Recharging HOT BATrERIESBitstorage Keylesschuck Batterypack Reverse Selector Switch Trigger REDKnow Your DRILL-DRIVER Screwdriverbits Wrist StrapCharging Battery Pack Selector Switch Centerposition TriggerSwitch Lock Lock Variable SpeedTo Install Battery Pack Depresslatchesto ReleasebatterypackTo Remove Battery Pack ReversibleWhen not in use, bits provided with your drill can be Screwdriver Bits Area Installing BitsBIT Storage Chuckjaws Chuckbody Drillbit ChuckcollarAdjustable Torque Clutch To Adjust TorqueTo Decrease Torque Adjusting Ring Toincrease Level Drilling Removing BitsDrilling Chuck RemovalMallet Keyless Chuck JawsChuck Removal To Retighten a Loose ChuckBattery Pack Removal Preparation for Recycling Page Key PaN Number Description Quan Can Be Purchased Thru Rsos Retail Special Order SystemAnytime

973.111471 specifications

The Craftsman 973.111471 is a versatile and efficient tool designed for both amateur and professional users. As part of the Craftsman brand, it exemplifies the commitment to quality, durability, and performance. This tool is engineered to offer a reliable solution for a variety of tasks, making it a valuable addition to any workshop or home.

One of the standout features of the Craftsman 973.111471 is its powerful motor. This high-performance motor delivers consistent and robust power for various applications, whether you’re driving screws, drilling holes, or tackling heavier materials. The tool’s speed settings are adjustable, allowing users to customize the performance based on the specific task at hand. With multiple speed options, the Craftsman 973.111471 ensures precision and control, enhancing overall effectiveness in different projects.

Another notable technology integrated into this model is its ergonomic design. The Craftsman 973.111471 is built with user comfort in mind, boasting a lightweight structure and a comfortable grip. This design reduces fatigue during prolonged use, enabling users to work longer without discomfort. Additionally, the tool’s balanced weight distribution enhances control, allowing for more accurate operation.

The durability of the Craftsman 973.111471 is also a significant characteristic. Constructed with high-quality materials, this tool is designed to withstand the rigors of regular use. Its sturdy build ensures longevity, making it a wise investment for those who frequently engage in DIY projects or professional tasks.

Safety features in the Craftsman 973.111471 cannot be overlooked. The tool comes equipped with essential safety mechanisms that protect users during operation. These safety features enhance user confidence, allowing for a more focused work experience without the distraction of potential hazards.

Moreover, the versatility of the Craftsman 973.111471 is exceptional. It is compatible with a range of accessories and attachments, which expands its functionality beyond basic tasks. This adaptability makes it suitable for various projects, from woodworking to metalworking, thus catering to a broad spectrum of users.

In conclusion, the Craftsman 973.111471 stands out as a reliable tool equipped with a powerful motor, ergonomic design, and built-in safety features. Its durability and versatility ensure that it meets the demands of diverse tasks with precision and efficiency. Whether for hobbyists or professionals, this tool represents an excellent choice for those seeking a dependable companion in their crafting and construction endeavors.