Savetheseinstructions

RULES FOR SAFE OPERATION (Continued)

•An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock.

If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b. That extension cord is properly wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet) 25' 50' 100'

Cord Size (AWG) 16 16 16

Note: AWG = American Wire Gage

•DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG. If damaged,

have replaced immediately by a qualified serviceman.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

•Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

•To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

•Do not use charger outdoors.

•Disconnect charger from power supply when not in use.

•SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known

to cause cancer, birth defects or other reproduc- tive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies,

depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

,_	Look for this symbol to point out important safety precautions. It means attention!!! Your safety is
	involved.

IMPORTANT INFORMATION FOR RECHARGING HOT BATrERIES

When using your drill-driver continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.

Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It does not occur under normal circumstances. Refer to "CHARGING BATTERY PACK" for normal recharging of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears repair center for electrical check.

,_ WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed.

We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores.

973.111471 specifications

The Craftsman 973.111471 is a versatile and efficient tool designed for both amateur and professional users. As part of the Craftsman brand, it exemplifies the commitment to quality, durability, and performance. This tool is engineered to offer a reliable solution for a variety of tasks, making it a valuable addition to any workshop or home.

One of the standout features of the Craftsman 973.111471 is its powerful motor. This high-performance motor delivers consistent and robust power for various applications, whether you’re driving screws, drilling holes, or tackling heavier materials. The tool’s speed settings are adjustable, allowing users to customize the performance based on the specific task at hand. With multiple speed options, the Craftsman 973.111471 ensures precision and control, enhancing overall effectiveness in different projects.

Another notable technology integrated into this model is its ergonomic design. The Craftsman 973.111471 is built with user comfort in mind, boasting a lightweight structure and a comfortable grip. This design reduces fatigue during prolonged use, enabling users to work longer without discomfort. Additionally, the tool’s balanced weight distribution enhances control, allowing for more accurate operation.

The durability of the Craftsman 973.111471 is also a significant characteristic. Constructed with high-quality materials, this tool is designed to withstand the rigors of regular use. Its sturdy build ensures longevity, making it a wise investment for those who frequently engage in DIY projects or professional tasks.

Safety features in the Craftsman 973.111471 cannot be overlooked. The tool comes equipped with essential safety mechanisms that protect users during operation. These safety features enhance user confidence, allowing for a more focused work experience without the distraction of potential hazards.

Moreover, the versatility of the Craftsman 973.111471 is exceptional. It is compatible with a range of accessories and attachments, which expands its functionality beyond basic tasks. This adaptability makes it suitable for various projects, from woodworking to metalworking, thus catering to a broad spectrum of users.

In conclusion, the Craftsman 973.111471 stands out as a reliable tool equipped with a powerful motor, ergonomic design, and built-in safety features. Its durability and versatility ensure that it meets the demands of diverse tasks with precision and efficiency. Whether for hobbyists or professionals, this tool represents an excellent choice for those seeking a dependable companion in their crafting and construction endeavors.