4.Using a T15 Torx® screwdriver, remove the burner base.
Large Dual Burner
AA. Burner cap
BB. Burner head
C | C. Gas opening |
DD. Burner base
A | Medium Burner | |
A. Burner cap | ||
| ||
B | B. Burner head | |
C | C. Gas opening | |
| D. Burner base |
8.For medium and large burners, replace the burner base using both screws. Replace burner head and cap.
For small burners, replace igniter using the following instructions.
Replace Igniter - Small Surface Burners Only
1.Unplug igniter wire from electrode.
IMPORTANT: Do not let the igniter wire fall down under the cooktop surface.
2.Using
D |
Small Burner
A
A. Burner cap
A
B
BB. Burner head C. Gas opening
CD. Burner base
D
5.Apply masking tape to the end of a 7 mm nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into gas opening and press down onto the gas orifice spud and remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside.
6.Replace with correct Natural gas orifice spud. See the “Natural Gas Orifice Spud/Hood Chart.”
Use the following chart to find the exact orifice spud placement.
Natural Gas Orifice Spud/Hood Chart
C
A.Retaining clip
B.Spring
C.LP gas igniter
3.Remove LP gas igniter and spacer from the burner base.
4.Insert Natural gas igniter into burner base. Slide spring onto the underside of the igniter and lock into place with the retaining clip.
Burner Rating | Size | Burner Style |
5,000 BTU | 1.01 mm | Small burners |
A
B
15,000 BTU | 1.75 mm | Medium burners |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20,000 BTU | 1.89 mm | Large burner - main |
| 0.69 mm | Large burner - simmer |
18,000 BTU | 1.93 mm | Grill burner |
|
|
|
Burner orifice spud |
| Grill orifice hood |
A
A
A. Size stamp | A. Size stamp |
| |
|
|
7.Place LP gas orifice spuds in plastic parts bag for future use and keep with package containing literature.
C
A.Retaining clip
B.Spring
C.Natural gas igniter
5.Place LP gas igniter, spacer, spring, and clip in plastic parts bag for future use and keep with package containing literature.
6.Plug in igniter wire.
7.Replace the burner base using both screws.
8.Replace burner head and cap.
17