INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

Adjustable wrench

For LP/Natural Gas

Tape measure

Conversions

T15 Torx®† screwdriver

 

 

Marker or pencil

 

Adjustable wrench

Pipe wrench

³⁄₈" drive ratchet

 

Flat-blade screwdriver

⁷⁄₈" socket

 

¹⁵⁄₁₆" combination wrench

 

 

½" deep-well socket

Wrench or pliers

 

 

7 mm nut driver

Pipe-joint compound

resistant to LP gas

Masking tape

 

Noncorrosive leak- detection solution

Parts Supplied

Check that all parts are included.

Gas pressure regulator

Burner grates

Burner caps

Grill grate (on grill models)

Wave tray (on grill models)

Flame spreader (on grill models)

Burner assembly (on grill models)

Grease trays (2) (on grill models)

Griddle drip tray (on griddle models)

Grill drip tray (on grill models)

Foam tape

LP orifice package (W10221288)

Conversion label (W10221320)

NOTE: The cooktop is manufactured for use with Natural gas. To convert to LP gas, see the “Gas Conversions” section.

Optional Backguards

48" (121.9 cm) models and grill models must be installed with a backsplash if installing at zero clearance to a combustible backwall. See “Cabinet Dimensions” in the “Location Requirements” section for installation requirements.

36" (91.4 cm) Retractable Backguard Order Part Number 8284756

48" (121.9 cm) Retractable Backguard Order Part Number 8284755

9" (22.9 cm) Backguard for 36" (91.4 cm) Cooktops Order Part Number W10115776

9" (22.9 cm) Backguard for 48" (121.9 cm) Cooktops Order Part Number W10115777

22" (55.9 cm) Backguard with Shelf for 36" (91.4 cm) Cooktops - Order Part Number W10225949

22" (55.9 cm) Backguard with Shelf for 48" (121.9 cm) Cooktops - Order Part Number W10225948

†®TORX is a registered trademark of Acument Intellectual Properties, LLC.

To order, see the “Assistance or Service” section of the Use and Care Guide.

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

High Altitude Conversion

To convert the cooktop for elevations above 6,560 ft (1999.5 m), order a High Altitude Conversion Kit.

Part Number W10237848 - LP high altitude

Part Number W10160841 - Natural gas high altitude

To order, see the “Assistance or Service” section of the Use and Care Guide.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the underside of the cooktop burner base.

It is recommended that a 600 CFM or larger vent hood be installed above the cooktop.

It is not recommended that a microwave hood combination be mounted above the cooktop.

The cooktop should be installed in a location away from strong draft areas, such as windows, doors and strong heating vents or fans.

All openings in the wall or floor where cooktop is to be installed must be sealed.

Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

Grounded electrical supply is required. See “Electrical Requirements” section.

Proper gas supply connection must be available. See “Gas Supply Requirements” section.

The cooktop is designed to hang from the countertop by its side or rear flanges.

The gas and electric supply should be located as shown in “Gas and Electric Connection Locations” section so that they are accessible without requiring removal of the cooktop.

Provide cutout in left rear corner of cutout enclosure as shown to provide clearance for gas inlet, power supply cord, and to allow the rating label to be visible.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

Mobile Home - Additional Installation Requirements

The installation of this cooktop must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or local codes.

In Canada, the installation of this cooktop must conform with the current standards CAN/CSA-A240-latest edition, or with local codes.

4

Page 4
Image 4
KitchenAid W10271686B installation instructions Installation Requirements, Tools and Parts, Location Requirements

W10271686B specifications

The KitchenAid W10271686B is a high-performance kitchen appliance designed to enhance food preparation and cooking efficiency. Known for its durability and user-friendly features, this appliance has become a favorite among home cooks and professional chefs alike.

One of the standout features of the KitchenAid W10271686B is its robust construction. Made from premium materials, it ensures longevity and resilience, making it a reliable addition to your kitchen. The stylish design is not only aesthetically pleasing but also functional, allowing it to seamlessly blend into various kitchen decors.

The W10271686B model incorporates advanced technologies that make cooking more effortless and enjoyable. With its intuitive controls, users can easily adjust settings to meet specific cooking needs. The appliance features multiple speed settings, enabling precise adjustments whether you’re kneading dough, mixing batter, or whipping cream. This versatility highlights its capability to handle a range of culinary tasks with ease.

Another major characteristic of this model is its powerful motor. The robust motor provides the necessary torque to mix heavy ingredients thoroughly, ensuring consistent results every time. This feature is particularly beneficial for baking enthusiasts, as it can easily tackle thick doughs and batters without strain.

One of the innovations that sets the KitchenAid W10271686B apart is the inclusion of a planetarium mixing action. This technology ensures that the mixing action covers the entire bowl, eliminating the need for manual scraping and ensuring that every ingredient is evenly combined. This results in perfectly blended mixtures that are crucial for achieving the best flavor and texture in various recipes.

Additionally, the KitchenAid W10271686B comes equipped with a range of attachments and accessories, expanding its functionality. Users can easily switch between different attachments, such as dough hooks, flat beaters, and whisk attachments, allowing them to customize their cooking experience based on the task at hand.

In conclusion, the KitchenAid W10271686B embodies a perfect blend of power, efficiency, and versatility. Its user-centric design, premium construction, and innovative features make it an invaluable tool in any kitchen. Whether you’re a novice or a seasoned chef, this appliance will elevate your culinary experience and help you create delicious dishes with ease and precision.