HAMMERHEAD |
| Fig. 2 |
|
| |
The hammerhead | impacts | the |
nails automatically | when | the |
tool is turned on. |
|
|
MAGNETIC SLEEVE
The magnetic sleeve holds the
head of the inserted nail against the recessed hammerhead for
the beginning of nail driving. The sleeve retracts at the end
of nail driving to allow the hammerhead to drive the nail
head flush to the workpiece.
LED WORKMGHT
Magnetic
Sleeve
Magnetic
Sleeve
The LED worklight, located on the front of the hammer, illuminates when the trigger switch is depressed. This feature provides extra light for increased visibility.
_L. WARNING: If any parts are broken or missing, do not attempt to plug in the power cord or operate the hammer until the broken or missing parts are replaced. Failure to do so could result in possible serious injury.
WARNING: Do not attempt to modify this hammer or create accessories not recommended for use with this hammer. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
_, WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the hammer when assembling parts.
UNPACKING
This product has been shipped completely assembled.
•Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please contact a Sears Service Center.
PACKING LIST
1pc 12V
61352 Manual_Revised_08 | 0924 | Page 12 |