Craftsman 320. 61352 warranty General Maintenance, Problem, Cause Solution

,_, WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.

WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING: It is not recommended to use compressed dry air to clean the Auto-Hammer. If cleaning with compressed air is the only method to available, always wear safety goggles or safety glasses with side shields when using compressed air to clean the tool. If the operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician at a Sears Service Center.

PROBLEM

The Auto-Hammer does not work

CAUSE		SOLUTION
Battery is depleted		Charge the	battery
The	machine is too hot	Cool down	the machine
after	continuous usage

Battery is too hot after continuous usage

Allow battery to cool or re- place with a cool battery

6:$352 Manual_Revised_08 0924 Page 17